Solqris10系统安装.doc

Solaris 10 系统安装 说明：蓝色字体是配置选项。 T4安装步骤： 配置管理口的时候，默认情况下 state=disabled 需要更改配置将state置为enabled set state=enabled 最后执行 set commitpending=true 1配置管理接口 Oracle(R) Integrated Lights Out Manager Version 3.0.16.7.c r73993 Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved. Warning: The system appears to be in manufacturing test mode. Contact Service immediately. Warning: password is set to factory default. - cd /SP/network /SP/network - show /SP/network Targets: interconnect ipv6 test Properties: commitpending = (Cannot show property) dhcp_server_ip = none ipaddress = 192.168.2.106 ipdiscovery = static ipgateway = 192.168.2.250 ipnetmask = 255.255.255.0 macaddress = 00:10:E0:0E:92:09 managementport = /SYS/MB/SP/NETMGMT outofbandmacaddress = 00:10:E0:0E:92:09 pendingipaddress = 192.168.2.106 pendingipdiscovery = static pendingipgateway = 192.168.2.250 pendingipnetmask = 255.255.255.0 pendingmanagementport = /SYS/MB/SP/NETMGMT sidebandmacaddress = 00:10:E0:0E:92:08 state = enabled Commands: cd set show - set pendingipaddress=192.168.1.100 Set pendingipaddress to 192.168.1.100 - set pendingipgateway=192.168.1.1 Set pendingipgateway to 192.168.1.1 - set commitpending=true Set commitpending to true - set pendingipdiscovery = static Set pendingipdiscovery =to static -set pendingipdiscovery = static Set pendingipdiscovery = static - stop /SYS 停止初始系统 Are you sure you want to stop /SYS (y/n)? y stop: Target already stopped - set /HOST/bootmode script=setenv auto-boot? false 设置系统启动后进入ok模式 Set script to setenv auto-boot? false - start /SYS Are you sure you want to start /SYS (y/n)? Y start: Target already started - start /SP/console Are you sure you want to start /SP/console (y/n)? y Serial c