09UNGALDBRACKETS.pdfVIP

CEB STANDARD 009 : 1993 Specification for UNGALVANIZED D BRACKETS, SHACKLE STRAPS, COTTER PINS SPLIT PINS FOR OVERHEAD LT DISTRIBUTION LINES CEB Standard 009 : 1993 CEYLON ELECTRICITY BOARD No. 50, Sir Chittampalam A. Gardiner Mawatha, Colombo 2. Sri Lanka Telephone: 94-1-430471, 421720 Facsimile: 94-1-430473 E-mail : cebdp@mega.lk _ CEB STANDARD 009 : 1993 Amendment Slip No. 4 effective from 15th Oct. 1997 to CEB Standard 009 : 1993 Specification for Ungalvanised D Brackets, Shackle Straps, Cotter Pins and Split Pins for Overhead LT Distribution Lines REVISED TEXT October 1997 1. Clause 2.0 APPLICABLE STANDARDS To add the following para to the clause; Tolerance on width and thickness shall be in accordance with SLS 949 Part V - 1992 - Dimensions of Hot Rolled Steel Bars for Structural General Engineering Purposes. Drawing No. DSS/93/7606 To replace the Drawing bearing No. DS/93/7606 by the Drawing bearing No. DSS/97/7606 To amend Drawing No. DS/93/7606 everywhere it appears to read as Drawing No. DSS/97/7606. Clause NO. 3.0 - Basic Features To add the following Sub Clause to the end of the above clause. 3.2.6 - Fabricating Tolerances are indicated in the Drawing bearing No. DSS/97/7606 _ CEB STANDARD 009 : 1993 _ Amendment Slip No. 3 effective from to CEB Standard 009 : 1993 REVISED TEXT Drawing No. DS/93/7606 To amend M to read as 110mm for 90mm insulators and 85mm for 63mm insulators. CEB STANDARD 009 : 1993 Amendment Slip No. 2 effective from 01st March 1994 to CEB Standard 009 : 1993 REVISED TEXT 1. Clause 9.0 - Sample Study Amend the Clause 9.0 to