flush diaphragm pressure sensor.pdf

. 1 . SMP858-TST-S monosilicon diaphgram pressure transmitter Description Product introduction Safety is the primary concern of food and pharmaceutical production. Sanitary pressure transmitter specifically designed for the food and pharmaceutical industry, adopts stainless steel external structure. And the wetted parts with superb stainless steel 316L diaphragm and complete welding technology, the polished finish ≤0.4 Hygienic filling liquids in line with FDA υ. standard. Suitable for CIP and SIP cleaning. Richen international standard process connection for optional. Independent research and development of the core sensor and transmission technology, tens of millions of industrial field application test, hundreds of continuous improvement of design and manufacturing, fully automated equipment for factory inspection and records. Transmitter performance meet the national standard. Main parameters Pressure types Gauge Absolute pressure Measuring range -100kPa ~ 1MPa, Minimum range 5kPa Absolute pressure range 0 ~ 1MPa,Minimum range 10kPa Output signal 4-20mA,4-20mA+HART,customer Reference accuracy ±0.1% F.S. Measuring medium Field of application Approvals Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve Normal medium Gas, Steam, Liquid Special medium The fluids which compatible with wetted parts Process Industry Petrochemical, Chemical, Power, Steel, Cement, Papermaking 2017.02.V1.0 . 2 . Performance Parameter Performance Parameter Performance reference JJG882-2004 calibration conditions, 4 ~ 20mA+HART two wires analog signal output. The range is calibrated against the standard zero point. Silicon oil filling, 316L stainless steel isolation diaphragm. Nominal range: 6kPa Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve SMP858-TST-S monosilicon diap