FZA_Shock_BZS_D_06-605_en_.pdf

Federal agency for civil defence (Switzerland) Infrastructure Certificate of approval Approval symbol: BZS D 06-605 (Shock-testing) Component to be tested: fischer ZYKON anchor FZA, M6 – M16 Approval holder: SFS Unimarket AG, 9435 Heerbrugg (Switzerland) Period of validity up to: 31/12/2016 The basis for this approval are the instructions of the Federal agency for civil defence “Qualit?tsmanagement für prüfpflichtige Komponenten im Bereich Zivilschutz“ (“Quality management for components to be tested in the field of civil defence”) 1750-026 dated from February 10th, 2005. According to the results of the practical testings and evaluation of the technical documents the above mentioned component to be tested fulfils the requirements of the Federal agency of civil defence for the degree of protection Basic Protection. It is approved for the use in Swiss constructions for civil defence. For the overall quality of the product the approval holder is responsible. The testing of the components by the BABS (Federal agency of civil defence) mainly refers to the specific requirements on protective constructions for civil defence. This approval is based on the following documents of the Federal agency of civil defence (BABS), laboratory Spiez, 3700 Spiez (Switzerland). ? Test report BABS (Federal agency of civil defence), LS No. AGEW 2006-033 dated from 06/12/2006 ? Technical documents installation instructions (sighted) The approval holder respects with signing this certificate of approval his responsibilities according to the instructions of the Federal agency for civil defence “Qualit?tsmanagement für prüfpflichtige Komponenten im Bereich Zivilschutz“ (“Quality management for components to be tested in the field of civil defence”) 1750-026 dated from February 10th, 2005. Special notes: ? This approval refers to the requirements of the instructions of the Federal agency for civil defence “Qualit?tsmanagement für prüfpflichtige Komponenten im