计算机网络技术基础教学课件作者徐红教学资源安普线缆制作标准01课件.pdfVIP

The NETCONNECT Enhanced Category 5 Cabling System Engineering for Performance 2INTRODUCTION 3 WHERE DID IT COME FROM? 3 ENHANCED CATEGORY 5 PERFORMANCE 3 WHAT TO TEST 3 The Link 4 The Channel 4 Don’t Forget the Cable Assembly 4 PERFORMANCE PARAMETERS 5 ATTENUATION 5 NEAR END CROSSTALK (NEXT) 5 POWER SUM NEXT 5 ATTENUATION-TO-CROSSTALK RATIO (ACR) 6 FAR END CROSSTALK (FEXT) 7 RETURN LOSS 7 PROPAGATION DELAY AND DELAY SKEW 8 TEST RESULTS 9 2-CONNECTOR LINK – 110CONNECT OUTLET/PATCH PANEL 12 3-CONNECTOR LINK – 110CONNECT PATCH PANEL 13 3-CONNECTOR LINK – 110CONNECT XC 14 2-CONNECTOR LINK – MULTI-USER OUTLET/PATCH PANEL 15 2-CONNECTOR LINK – MULTI-USER OUTLET/110CONNECT XC 16 2-CONNECTOR CHANNEL – 110CONNECT OUTLET/PATCH PANEL 17 4-CONNECTOR CHANNEL – CONSOLIDATION POINT/PATCH PANELS 18 4-CONNECTOR CHANNEL – CONSOLIDATION POINT/110CONNECT XC 19 3-CONNECTOR CHANNEL – MULTI-USER OUTLET/PATCH PANELS 20 3-CONNECTOR CHANNEL – MULTI-USER OUTLET/110CONNECT XC 21 PERFORMANCE MARGINS 22 SUMMARY 22 3Introduction Choosing a cabling system has never seemed more complicated. Just as most of the issues concerning Category 5 have been resolved, along come standards proposals for Enhanced Category 5, Category 6 and Category 7; even proprietary classification schemes for cabling performance. Just when we were getting comfortable with the concept of implementing 100 Mbps data rates on twisted pair cable, along comes the possibility of achieving one gigabit per second over copper cable. Its enough to boggle the mind. This paper addresses the AMP NETCONNECT Enhanced Category 5 Cabling System. Well look at what makes Enhanced Category 5 enhanced, how this system compares to the standard for Category 5e, and why you should consider specifying Enhanced Category 5 as the minimum cabling system of choice for your business. The AMP NETCONNECT Enhanced Category 5 System is the highest performance Cat 5e system in the industry; exceeding all specifications for Category 5e and 1000BA