LTE典型信令过程概念.pptVIP

LTE 典型信令过程 Software Architecture 3类NAS信令流程 1. 会话管理相关 2. 位置管理相关 3. 鉴权管理相关 UE eNB MME SGW PGW RRC: RRC Connection setup complete NAS: Attach Request NAS:PDN connectivity request S1AP: Initial UE message Authentication and NAS security procedure HSS S6a: Update Location request S6a: Update Location answer S11: Create bearer request S5: Create bearer request S5: Create bearer response S11: Create bearer response S1AP: Initial Context setup request NAS: Attach accept NAS: Activate Default EPS bearer request NAS: Attach Request NAS:PDN connectivity request RRC: RRCConnectionReconfiguration NAS: Attach accept NAS: Activate Default EPS bearer request RRC: RRCConReconfigComplete S1AP: Initial Context setup response RRC: UL information Transfer NAS: Attach complete NAS: Activate Default EPS bearer accept S1AP: Uplink NAS Transport NAS: Attach complete NAS: Activate Default EPS bearer accept UE initiated Detach Procedure UE eNB MME SGW PGW HSS RRC: RRC Connection setup complete NAS: Detach request S1AP: Initial UE message NAS: Detach request Authentication and NAS security S11: Delete session request S5: Delete session request S5: Delete session response S11: Delete session response S1AP: Downlink NAS transport NAS: Detach accept RRC: DLInformation transfer NAS: Detach accept Radio and S1 Release S6a: TDelay purge timer expires S6a: Purge UE request S6a: Purge UE answer UE Triggered Service Request Procedure Initial UE Message Network Triggered Service Request TAU procedure Inter MME-TAU-message flow Handover Handover Air Interface TYPES OF HANDOVER X2 Based Handover : without SGW change and with SGW change S1 Based Handover : with eNB, MME and SGW change X2 Handover X2 is the interface between two eNB’s and X2-AP is the protocols used for communication over it. The handover is directly performed between two eNodeB’s. Handover takes place when the eNB detects that UE can no longer be served by it because of the power constraints. The MME is only informed a