Atmospheric plasma sprayed thick thermal barrier coatings with high segmentation crack density.pdf

下载文档

0
0
约 11页
2017-04-09 发布于江苏
举报
版权申诉
保障服务

Atmospheric plasma sprayed thick thermal barrier coatings with high segmentation crack density.pdf

1、本文档共11页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。

Atmospheric plasma sprayed thick thermal barrier coatings with high segmentation crack density

/locate/surfcoat Surface Coatings Technology 186 (2004) 353–363Atmospheric plasma sprayed thick thermal barrier coatings with high segmentation crack density H.B. Guo*, R. Va?en, D. Sto?ver Institut fu?r Werkstoffe und Verfahren der Energietechnik 1, Forschungstentrum Ju?lich GmbH, 52425 Ju?lich, GermanyReceived 15 July 2003; accepted in revised form 8 January 2004 Available onlineAbstract Atmospheric plasma sprayed thick thermal barrier coatings (TBCs), comprising of 1.5 mm thickness yttria stabilized zirconia (YSZ) coating, have been developed for increasing thermal protection of combustor applications. Different segmentation crack densities of the YSZ coating were created by controlling the deposition conditions. It was found that the substrate temperature played a dominant role in determining the segmentation crack density. The density was found to increase with the increase of substrate temperature and liquid splat temperature. High passage thickness, if achieved by low plasma gun speed, contributed to improve the segmentation crack density. The density could not be effectively improved by increasing the powder feed rate, although a high passage thickness was obtained in this case. The pores, mainly consisting of delaminations with the radii range between 0.02 and 1 Am, prevent the segmentation cracks from propagation. The coatings sprayed at high substrate temperature show an excellent intersplat bonding and often even continuous columnar grains through several splats. Additionally, horizontally branching cracks were also formed together with the segmentation cracks when a high lamellar thickness was used during the spraying. Thermal cycling tests showed that the coating with a segmentation crack density of approximately 3.6 mm1 had a lifetime of more than 1700 cycles at 1238 jC (surface)/938 jC (bond coat), indicative of excellent thermal shock resistance. Failure of the TBCs occurred by chipping in the surface layer of YSZ coating, which is different from