STEVAL-ILL009V4;中文规格书,Datasheet资料.pdf

Data Brief For further information contact your local STMicroelectronics sales office. November 2007 Rev 1 1/4 4 STEVAL-ILL009V4 OSRAM Golden DRAGON? LEDs board Features ■ LED package: white SMT package, colorless clear silicone resin ■ Feature of the device: point lightsource with high luminous efficiency and low space ■ Grouping parameter: luminous flux wavelength radiant power ■ ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-B Description This board is an option to the STEVAL-ILL009V3. As a light source, there are four Golden DRAGON? LEDs used with a maximum forward current of 350 mA. The STEVAL-ILL009V1 can drive eight Golden DRAGON? LEDs. To demonstrate the driving capability of the STP04CM596, only four LEDs are used on the load board. This means that one STP04CM596 driver is not used. The STLM20 temperature sensor is assembled in the middle of the LEDs to protect against overheating. STEVAL-ILL009V4 / Board schematic STEVAL-ILL009V4 2/4 1 Board schematic Figure 1. Schematic VCC Temperature sensor R1 G1a G1b B1 R = U_r / I = 1,4 / 0.35 = 4 Ohms = 3.3 Ohms used (R4||R5||R6) U_r = U_s - U_f_red = 4 - 2,6 = 1,4V R5 10 C7 100nF R 1 1 R 1 2 G 1a 3 G 1a 4 G 1b 5 G 1b 6 B 1 7 B 1 8 R 2 9 R 2 10 G 2a 11 G 2a 12 G 2b 13 G 2b 14 B 2 15 B 2 16 N C 17 N C 18 G N D 19 G N D 20 N C 21 V o 22 N C 23 V cc 24 N C 25 N C 26 V d 27 V d 28 V d 29 V d 30 CONNECTOR2ICC R6 10 R4 10 V+4 NC 1 Vo 3 GND 2 GND5 IO5 STLM20 / STEVAL-ILL009V4 Revision history 3/4 2 Revision history Table 1. Document revision history Date Revision Changes 20-Nov-2007 1 Initial release / STEVAL-ILL009V4 4/4 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms