19780;中文规格书,Datasheet资料.pdf

TB-3014 May 2012 Page 1 of 7 Surface Resistance Test Kit Operation and Maintenance Figure 1. Desco 19780 Surface Resistance Test Kit Description The Surface Resistance Test Kit is a portable, accurate, and versatile instrument designed to measure resistance point-to-point (RTT), surface to ground (RTG), and surface resistivity in accordance with ESD Association Standard ANSI/ESD S4.1 including: ? Resistance measuring accuracy ± 10% (E11 greater ±20%) ? Resistance range 1.0 x 10E3 ohms to 10E12 ohms ? Open circuit voltages of 10 and 100 volts ± 5% ? Electrification period of 15 seconds ? Electrodes (two) 5 pounds ± 2 oz with 50-70 durometer conductive pads In addition, the Meter measures ambient temperature and relative humidity. The Surface Resistance Test Kit (or its Meter) is referenced and designed to be used to make measurements in accordance with the test methods in: ? Worksurfaces - ANSI/ESD S4.1 Worksurfaces Compliance Verification - ESD TR53 - Resistance Measurements ? Floors - ANSI/ESD S7.1- Resistive Characterization of Materials Floor Materials ? Footwear - ESD S9.2 - Footwear - Resistive Characterization ? Garments - ANSI/ESD STM2.1 Garments ? Seating - ANSI/ESD STM12.1- Seating - Resistive Measurement ? Floor/Footwear - ANSI/ESD STM97.1 - Floor Materials and Footwear- Resistance Measurement in Combination with a Person ? Workstations - ESD-ADV53.1 - ESD Protective Workstations Versatility: Measures RTT, RTG or Resistivity (requires optional Resistivity Attachment, EMIT item 50560) ? Quick Checks - Surface resistance exponent number illuminates immediately i.e. 8 = 10E8 ohms or 100,000,000 ohms ? Compliance Verification - Surface resistance exponent number illuminates immediately and displays Temperature and Relative Humidity during 15 second electrification period making numerous measure ments and calculations to then display mantissa i.e. if LED displays 8 and LCD displaying 7.14 as mantissa = 7.14