AD8033_8034.pdf

Low Cost, 80 MHz FastFET Op Amps AD8033/AD8034 Rev. D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 ?2002–2008 Analog Devices, Inc. All rights reserved. FEATURES FET input amplifier 1 pA typical input bias current Very low cost High speed 80 MHz, ?3 dB bandwidth (G = +1) 80 V/μs slew rate (G = +2) Low noise 11 nV/√Hz (f = 100 kHz) 0.7 fA/√Hz (f = 100 kHz) Wide supply voltage range: 5 V to 24 V Low offset voltage: 1 mV typical Single-supply and rail-to-rail output High common-mode rejection ratio: ?100 dB Low power: 3.3 mA/amplifier typical supply current No phase reversal Small packaging: 8-lead SOIC, 8-lead SOT-23, and 5-lead SC70 APPLICATIONS Instrumentation Filters Level shifting Buffering GENERAL DESCRIPTION The AD8033/AD8034 FastFET? amplifiers are voltage feedback amplifiers with FET inputs, offering ease of use and excellent performance. The AD8033 is a single amplifier and the AD8034 is a dual amplifier. The AD8033/AD8034 FastFET op amps in Analog Devices, Inc., proprietary XFCB process offer significant performance improvements over other low cost FET amps, such as low noise (11 nV/√Hz and 0.7 fA/√Hz) and high speed (80 MHz bandwidth and 80 V/μs slew rate). With a wide supply voltage range from 5 V to 24 V and fully operational on a single supply, the AD8033/AD8034 amplifiers work in more applications than similarly priced FET input amplifiers. In addition, the AD80