Install Grid Contro onOpenSuse11.pdfVIP

Install Grid Control on OpenSuse 11.1 Required Software:- OpenSUSE 11.1 Download Grid Control Softwares:- Linux_Grid_Control_full_102010_disk1.zip Linux_Grid_Control_full_102010_disk2.zip Linux_Grid_Control_full_102010_disk3.zip ** Extract all into single folder. GridControl__LINUX_Patchset.zip 1. Install OpenSuSE as usual. 2. After completed, configure the hostname and IP properly. Go to Computer -Network - Network Settings, under Overview tab, select the NIC and click EDIT button. Change to use ‘Statically Assigned IP Address’:- a. IP Address: 00 b. Subnet Mask: c. Hostname: grid01 Go back to Network Settings, under Hostname/DNS tab, keyin ebsdb01 as hostname, as domain name and Click OK. New setting will be applied immediately. 3. Edit the /etc/hosts file using root account. Make sure you have a line as following:- 00 grid01 4. Next, we want to reinstall vmware-tools client. The OpenSUSE installed with vmware client automatically, but we not working well with current VMware version. Follow below steps to reinstall vmware client:- a. Select ‘Install Software’, ignore the errors when it prompt. You will come to Software Manager. b. Install a package called ‘vm-install’ and ‘db1’. Click Install button and they Apply button to get it installed immediately. c. After installed, get in to Software Manager again. This time you need to uninstall 2 packages open-vm-tools and open-vm-tools-gui. d. Reinstall vmware client from console: On the VMware console’s file menu, click on VM - Install VMware Tools. The setup software will be mounted automatically on /media/VMware Tools/. e. cd /media/VMware\ Tools/ f. rpm –Uvh VMwareTools-1.0.8-126538.i386.rpm g. After installed rpm completed, run ‘vmware-config-tools.pl’ to configure and just follow default value to configure. h. Run ’vmware-toolbox ’ to start vmware client. Don’t close the client. 5. Add the following lines to the /etc/sysctl.conf file. kernel.shmall = 20971