MIC5219BM5.pdfVIP

July 2000 1 MIC5219 MIC5219 Micrel Typical Applications MIC5219 500mA-Peak Output LDO Regulator General Description The MIC5219 is an efficient linear voltage regulator with high peak output current capability, very low dropout voltage, and better than 1% output voltage accuracy. Dropout is typically 10mV at light loads and less than 500mV at full load. The MIC5219 is designed to provide a peak output current for startup conditions where higher inrush current is demanded. It features a 500mA peak output rating. Continuous output current is limited only by package and layout. The MIC5219 can be enabled or shut down by a CMOS or TTL compatible signal. When disabled, power consumption drops nearly to zero. Dropout ground current is minimized to help prolong battery life. Other key features include reversed- battery protection, current limiting, overtemperature shut- down, and low noise performance with an ultra-low-noise option. The MIC5219 is available in adjustable or fixed output volt- ages in space-saving SOT-23-5 and MM8? 8-lead power MSOP packages. For higher power requirements see the MIC5209 or MIC5237. Features ? Guaranteed 500mA-peak output over the full operating temperature range ? Low 500mV maximum dropout voltage at full load ? Extremely tight load and line regulation ? Tiny SOT-23-5 and MM8? power MSOP-8 package ? Ultra-low-noise output ? Low temperature coefficient ? Current and thermal limiting ? Reversed-battery protection ? CMOS/TTL-compatible enable/shutdown control ? Near-zero shutdown current Applications ? Laptop, notebook, and palmtop computers ? Cellular telephones and battery-powered equipment ? Consumer and personal electronics ? PC Card V CC and V PP regulation and switching ? SMPS post-regulator/dc-to-dc modules ? High-efficiency linear power supplies 1 2 3 4 8 7 6 5 MIC5219-5.0BMM 2.2μF tantalum V OUT 5V V IN 6V ENABLE SHUTDOWN 470pF 5V Ultra-Low-Noise Regulator 1 5 2 3 4 2.2μF tantalum 470pF V OUT 3.3V MIC5219-3.3BM5 V IN 4V ENABLE