张小楼0.9mta矿井设计_毕业论文
摘 要
本设计包括三个部分:一般部分、专题部分和翻译部分。
一般部分为张小楼0.9Mt/a矿井设计。张小楼煤矿位于江苏徐州市西北面,交通便利。井田走向长约3.53km,倾向长约4.8km,井田总面积为16.94km2。主采煤层为7号煤、9号煤,平均倾角为20°,煤层平均总厚为5.0m。井田地质条件复杂。
井田工业储量为11491.4万t,矿井可采储量8192.8万t。矿井服务年限为63a,涌水量不大,矿井正常涌水量为21m3/h,最大涌水量为30m3/h。矿井瓦斯涌出量较低,为低瓦斯矿井。
井田为立井多水平开拓。大巷采用矿车运煤,辅助运输采用矿车和材料车运输。矿井通风方式中央边界式通风。
矿井年工作日为330d,工作制度为“三八”制。
一般部分共包括10章:1.矿区概述及井田地质特征;2.井田境界和储量;3.矿井工作制度及设计生产能力、服务年限;4.井田开拓;5.准备方式—采区巷道布置;6.采煤方法;7.井下运输;8.矿井提升;9.矿井通风与安全技术;10.矿井基本技术经济指标。
专题部分题目是综合开拓。主要叙述综合开拓的类型和例子。
翻译部分主要内容为长臂工作面顶板的分类。
ABSTRACT
This design includes of three parts: the general part, special subject part and translated part.
The general part is a design of Zhangxiaolou mine. Zhangxiaolou mine lines in NorthWest of Xuzhou in Jiangsu province. The traffic of road and railway is very convenience to the mine. The run of the minefield is 3.53 km ,the width is about 5.8 km,well farmland total area is 16.94 km 2.The seven and nine is the main coal seam, and its dip angle is 20 degree. The thickness of the mine is about 5.00m in all. The proved reserves of the minefield are 114.9 million tons. The recoverable reserves are 81.9 million tons. The designed productive capacity is 0.9 million tons percent year, and the service life of the mine is 63 years. The normal flow of the mine is 21 m3 percent hour and the max flow of the mine is 30 m3 percent hour. The mineral well gas gushs the deal lower, for low gas mineral well.
The well farmland is a multi level in a subvertical well to expand.
The working system “three-eight” is used in the Zhangxiaolou. It produced 330d/a.
This design includes ten chapters: 1.An outline of the mine field geology; 2.Boundary and the reserves of mine; 3.The service life and working system of mine; 4.Development engineering of coalfield; 5.The layout of panels; 6. The method used in coal mining; 7. Transportation of the underground; 8.The lifting of the mine; 9. The ventilation and the safety operation of the mine; 10.The basic economic and technical norms.
A special subject part
您可能关注的文档
- 运筹学产销不平衡运输_毕业论文.doc
- 云南玉溪红塔大道综合管廊基坑支护施工组织设计_毕业设计.doc
- 运动控制系统课程设计不可逆vm双闭环直流调速系统设计_毕业论文.doc
- 运动会成绩管理系统设计_毕业设计.doc
- 运输有限公司安全生产标准化达标考评自评报告_毕业设计.doc
- 运维服务管理体系方案全套_毕业设计.doc
- 运维服务管理体系建设方案全案_毕业设计.doc
- 运维信息系统运行保障方案_毕业设计.doc
- 杂交奶水牛体尺和体重及乳房性状与产奶性能的相关分析_毕业论文.doc
- 载货汽车汽车动力总成匹配与总体设计_毕业设计.doc
- GB/T 42818.2-2026认知无障碍 第2部分:报告.pdf
- 中国国家标准 GB/T 47116-2026地下采矿机械 工作面移动式采掘机械 采煤机和犁式系统的安全要求.pdf
- 《GB/T 47116-2026地下采矿机械 工作面移动式采掘机械 采煤机和犁式系统的安全要求》.pdf
- 中国国家标准 GB/T 42818.2-2026认知无障碍 第2部分:报告.pdf
- 《GB/T 42818.2-2026认知无障碍 第2部分:报告》.pdf
- 《GB/T 27664.1-2026无损检测仪器 超声检测设备的性能与检验 第1部分:仪器》.pdf
- 中国国家标准 GB/T 27664.1-2026无损检测仪器 超声检测设备的性能与检验 第1部分:仪器.pdf
- GB/T 27664.1-2026无损检测仪器 超声检测设备的性能与检验 第1部分:仪器.pdf
- GB/T 45305.5-2026声学 建筑构件隔声的实验室测量 第5部分:测试设施和设备的要求.pdf
- 中国国家标准 GB/T 45305.5-2026声学 建筑构件隔声的实验室测量 第5部分:测试设施和设备的要求.pdf
最近下载
- 高等机构学01螺旋理论基础讲义.ppt
- 基于plc的清洗消毒机控制系统设计 .pdf VIP
- 发明专利说明书范例.pdf VIP
- 人教版英语中考九年级话题复习中国传统节日Chinesetraditionalfestivals教学设计.docx VIP
- 四年级道德与法治下册第一单元单元整体教学设计.pdf VIP
- 进修汇报医生课件课件.pptx VIP
- 03G102钢结构设计制图深度和表示方法(高清版) (OCR).pdf VIP
- 基于三菱PLC的自动洗碗机控制系统设计.doc VIP
- 下肢深静脉血栓形成介入治疗护理实践指南(2025)解读PPT课件.pptx VIP
- 南京新港东区建设发展有限公司南京龙潭新城花园路等13条道路及花园河等4条河道工程项目环评报告表(报批稿).pdf VIP
原创力文档

文档评论(0)