数字射线扫描成像系统MTF的测试分析.pdfVIP

第 39卷第 7 期 2016 年 7 月 核技术 NUCLEARTECHTUQUES 数字射线扫描成像系统 MTF 的测试分析 孙朝明汤光平王增勇李强 (中国工程物理研究院机械制造工艺研究所绵阳 621900) VoI.39, No.7 July 2016 摘要 为有效实现数字射线扫描成像检测系统性能的定量分析评价，据此进行检测工艺参数的优化，对数字 射线扫描成像检测系统调制传递函数(Modulation transfer function, MTF)进行了测试分析。采用刀口工具、双线 型像质计、分辨率测试卡，对系统在不同焦点大小、放大倍数、运动方向的检测情况，分别进行了 MTF 的测 试并进行了比较。结果表明，双线型像质计与分辨率测试卡的测试结果基本一致，但双线型像质计更便于对 比度的定量计算:双线型像质计的对比度传递函数近似符合二次曲线，经转换得到的调制传递函数值高于刀 口法的测试值，刀口法计算数值偏低的原因在于运动不平稳所带来的不利影响。分析表明，数字射线扫描成 像系统性能受到多个因素的共同影响， MTF 测试结果可较全面地对影响因素进行定量评价，可用于确定最佳 的检测参数或找出等价的参数组合。 关键词 射线数字成像，线阵列探测器，系统调制传递函数，刀口工具，双线型像质计，分辨率测试卡 中图分类号 TG115.28 , TL816 DOI: 10.11889/j.0253-3219.2016.hjs.39.070203 Analysis of MTF in digital radiography using linear detector array SUN Chaoming TANG Guan即ing WANG Zengyong LI Qiang (Institute 01 Machinery Mam伪cturing Technology, China Academy 01 Engineering Physics, Mianyang 621900, China) Abs衍act Background: Nowadays, digital radiography is widely utilized in non-destructive testing. However, some issues concerning 也is new technique need to be addressed properly, and some key p缸回neters of the imaging system need to be quantified by some m四S町ement methods. PU叩ose: To evaluate a digital radiography system using linear detector 缸ray quantitatively and efficiently, and optimize the testing p缸缸neters accordingly, modulation transfer 句nction (MTF) of the imaging system was calculated and analyzed. Methods: Edge tool, duplex wire image quality indicator (IQI) and resolution test card were used ωmωureMπof the system under ditferent testing parameters, which include focus size, magnification and object orientation. Results: Results show 也at 也e con仕ast 回皿fer function (CTF) measured by duplex IQI and resolution test card is almost identical, while signals from duplex IQI 缸E easier to analyze quantitatively. CTF 丘om duplex IQI is appr，。对mately a curve of second order, and the CTF can be used to 往回lsform to MTF, but the values are higher 也an that from edge tool, as movement during image a，叫uisition pr，ωess is unst