过载传感器信号调理电路设计综述.docxVIP

过载传感器信号调理电路设计 摘要 本文介绍了研究电容微加速度传感器信号调理电路设计的意义与目的，分别阐述了电容微加速度传感器的发展历程、国内外发展现状以及在多个领域中的应用，简述了信号调理电路的原理和评价的主要性能指标，以及电容微加速度传感器的原理和优点。 电容微加速度传感器目前已被广泛应用，基于能更好应用电容微加速度传感器的目的，需要为其配备合适的信号调理电路。本课题开发一种适用电容微加速度传感器的信号调理电路，该电路首先对电容微加速度传感器的信号进行电压转换，然后进行适调放大后经过滤波和信号二级放大电路，最后通过积分电路排除一定干扰后，使传感器的输出信号能被识别获取。经过仿真和实验检测表明，此电路性能可靠，效果良好。 关键词：电容微加速度传感器，信号调理，高低通滤波，信号放大 Overload Sensor Signal Conditioning Circuit Design Abstract This paper introduces the significance and purpose of the study of Signal conditioning circuit design for MEMS acceleration sensor , then clarifies the development of domestic and international situation and the application in areas of the constant current source and piezoelectric acceleration sensor. The difference between ideal Signal conditioning circuit and the actual is presented. And then introduces the principle and the main source of constant evaluation of performance indicators of the Constant current source and MEMS acceleration sensor’s principle and advantages. With MEMS acceleration sensors being widely used , and for the purpose of better application , a suitable Signal conditioning circuit supply circuit is needed. This topic develops a kind of Signal conditioning circuit which is applicable to the MEMS sensor and supply current for it. The Signal conditioning circuit transfer Signal source to stable voltage, and then filtered Conditioning amplified signal and the second stage amplifier circuit, and finally exclude certain interference by integrating circuit,Through simulation and experiment show that the performance of this circuit is reliable and the effect is good . Key words:MEMS Acceleration Sensors, Signal Conditioner circuit, High And Low Pass Filter 目录  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc449992680 1 绪论  PAGEREF _Toc449992680 \h 7  HYPERLINK \l _Toc449992681 1.1 本课题的研究背景  PAGEREF _Toc449992681 \h 7  HYPERLINK \l _Toc449992682 1.2 本课题的研究目的和意义  PAGEREF _Toc449992682 \h 8  HYPERLINK \l _Toc449992683 1.3 本课题国