mastercam MPA2100E 辛辛那提后处理程序.docVIP

# Post Name : MPA2100E # Product : MILL # Machine Name : CINCINNATI SABRE/ARROW MILL # Control Name : ACRAMATIC 2100E # Description : CINCINNATI SABRE/ARROW MILL # Associated Post : NONE # Mill/Turn : NO # 4-axis/Axis subs. : YES # 5-axis : NO # Subprograms : YES # Executable : MP 9.0 # # WARNING: THIS POST IS GENERIC AND IS INTENDED FOR MODIFICATION TO # THE MACHINE TOOL REQUIREMENTS AND PERSONAL PREFERENCE. # # -------------------------------------------------------------------------- # Revision log: # -------------------------------------------------------------------------- # Programmers Note: # CNC 05/01/01 - Initial post update for V8.1, rjm # CNC 01/09/02 - Initial post update for V9.0, rjm # # -------------------------------------------------------------------------- # Features: # -------------------------------------------------------------------------- # This post supports Generic Acramatic 2100E code output for 3 axis milling. # It is designed to support the features of Mastercam Mill V8. # # Following Misc. Integers are used: # # mi1 - Work coordinate system # 0 = Reference return is generated and G92 with the # X, Y and Z home positions at file head. # 1 = Reference return is generated and G92 with the # X, Y and Z home positions at each tool. # 2 = Fixture Offsets of H1, H2...H32 based on Mastercam settings. # # mi2 - Absolute or Incremental positioning at top level # 0 = absolute # 1 = incremental # # mi3 - Select for G28 reference point return at toolchange. # 1 = G28 output requested. # #Canned text: # Entering cantext on a contour point from within Mastercam allows the # following functions to enable/disable. # Cantext value: # 1 = Stop = output the M00 stop code # 2 = Ostop = output the M01 optional stop code # 3 = Bld on = turn on block delete codes in NC lines #