ASC空压转角缸-1.pdf

TAIWAN AMAC CLAMP INDUSTRIAL CO., LTD. TEL:886-4FAX:884-4ASC Air Swing Clamp Cylinder ? Bore:?25-?63mm ? Pmax:10kg/cm 2 ? MC ? ? A.B ? 1.5 ? Product Introduction ? The product is ideal for mass production on a special purpose machine and jig on machining center. It will greatly upgrade production efficiency. ? When the air cylinder actuate, and the piston moves downward, the clamping arm will swing to a rated angle! Then it lowers until the workpiece is clamped securely. ? To avoid too fast motion a flow control valve is suggested to connect to the air inlet ports (A, B) on the swing clamp cylinder. Do not clamp workpiece while the clamp is swinging to avoid damaging on the cylinder barrel and internal parts. ? When increasing length of clamping arm is required, be sure do not exceed 1.5 times of the ariginal length. ? The cylinder body is manufactured from aluminum allog. Surface is hard membrane treated for maximum smoothness on inside surface and long service life. Specifications Ordering Code Bore of cylinder mm ?25 ?32 ?40 ?50 ?63 Piston rod diameter mm ?14 ?16 ?16 ?20 ?20 Swing stroke mm 9 11 11 13 13 / Clamping stroke std/extension mm 13 15 / 30 15 / 30 17 / 34 17 / 34 / Pressure area pull/push cm 2 3.37 / 4.91 6.03 / 8.04 10.56 / 12.57 16.49 / 19.63 28.03 / 31.17 Theoretical clamping force 6kg/cm 2 20 36 63 99 168 Fluid Filtered air Max operation pressure 10Kg/cm 2 Operation pressure range 1-7Kg/cm 2 Rotating direction R L Turn right R or turn left L Rotating angle 90 0?, 45?, 60? Standard angle 90?, Optional angle 0?, 45?, 60? Acting type Double acting R Series Bore of Cylinder Clamping arm type 25:?25mm 32:?32mm 40:?40mm 50:?50mm 63:?63mm Type Rotating Angle Stroke extension Line type Rotating Direction S: S: Single side arm D: D: Double side arm : Blank: Line type MF: MF:Manifold with flow control MS: MS:With magnetic induction TB: TB: Threaded body FA: FA: Flange type ASC MF 25 S 90 E N:0? N:0? No swing L L: Turn left R R: Tur