iwatt LED驱动.pdf

iWatt Solutions for White LED Driver 26 Mar ’08 iWatt Confidential – Do Not Copy 226/Mar/08 LED LAMP 1W-3W 3W-5W 5W-20W iWatt Confidential – Do Not Copy 326/Mar/08 General Requirement For WLED Driver a) Line isolation & Hi-pot test – Meet IEC60968&IEC61347 b) Tight CC Regulation – Accuracy between +/- (5 – 10)% c) High Efficiency - Typical 65% min for 1W d) Size and Part count – Minimum and Smallest e) Protections – Line UV, OV, Output Short / Open f) EMC requirement – Meet EN55015B (QP & AV scan) iWatt Confidential – Do Not Copy 426/Mar/08 iWATT solution for white LED driver (CC @ +/-5%) 1 6 . 5 m m 26 mm iWatt Confidential – Do Not Copy 526/Mar/08 1W LED - 5V 350mA 3W LED - 5V 700mA 3x1W LED - 12V 350mA Isolated WLED Driver using iW1689/iW1692 (1W~3W) iWatt Different PCB designs also available for matting with different Lamp housings E27 E27L GU10 iWatt Confidential – Do Not Copy 626/Mar/08 a) Line isolation b) CC Regulation – Accuracy between +/- (5 – 15)% c) Efficiency - Typical 65% min@3.5V700mA d) Part count – less than 24 e) Protections – Line UV, OV, Output Short / Open f) EMI and EMC requirement – Meet EN55015B (QP & AV scan) LED Driver Solution With iW1689/iW1692 For 1W-3W 1 6 . 5 m m 26 mm H=16mm GU10 E27 Demo and solutions for 1pcs 1W LED 3.5V350mA η =65% 1pcs 3W LED 3.5V700mA η=65% 3pcs 1W LED 10.5V350mA η=69% iWatt Confidential – Do Not Copy 726/Mar/08 a) Line isolation b) CC Regulation – Accuracy between +/- (5 – 5)% c) EFD15 transformer for low profile d) Protections – Line UV, OV, Output Short / Open 1W-3W LED Lamp Driver – for GU10 E27 housing_ With iW1692 27mm H=13mm 1 7 m m GU10 Demo and solutions for 1pcs 1W LED 3.5V350mA η =65% 1pcs 3W LED 3.5V700mA η=65% 3pcs 1W LED 10.5V350mA η=75% iWatt Confidential – Do Not Copy 826/Mar/08 a) None- isolation design b) CC Regulation – Accuracy between +/- (5 – 5)% c) EE13 or RM6 transformer for small profile d) Protections – Line UV, OV, Output Short / Open 3W-6W L