150吨每日双胶纸用木浆洗选漂工段工艺设计说明书.docxVIP

广东石油化工学院本科毕业(设计)论文：150t/日双胶纸用漂白木浆洗选漂工段工艺设计 学号： 毕业设计 150吨/日双胶纸用木浆洗选漂工段工艺设计 The process design contained washing,filtering and bleaching section of 150 tons per day pulp used by two-sided offset paper 学院 化学工程学院 专业 应用化学 班级 学生 指导教师（职称） 完成时间 2016 年 3 月 14 日至 2016 年 6 月 5 日摘要 PAGE \* ROMAN \* MERGEFORMATI Abstract PAGE \* ROMAN \* MERGEFORMATII 摘要 对非重点设计工段车间作了简要的方法技术说明，其中，备料工艺流程采用DCS实现全程自动控制的干湿法备料，蒸煮采用立锅碱式间歇蒸煮，长网多缸纸机抄造经打浆调料的双胶纸，施胶运用中性表面施胶及添加多种添加剂技术。对洗选漂工段车间的设计分别介绍了技术和设备，最终结合生产浆料特性采用了洗前除节初筛，洗浆后先氧脱木素后两段封闭筛选的工艺流程，然后经过三段除渣净化后洗涤浓缩以供漂白。根据漂白技术工业化程度，制浆方法，双胶纸性能要求，污染物排放标准等多方面综合考虑，确定了ODEP无氯元素四段漂工序。分别对各种主流的洗选漂设备进行对比后，最终选择较优组合。 关键词：双胶纸；工艺设计；真空洗涤；封闭筛选；ODEP漂 Abstract Abstract Abstract A brief description about technical is made on minor design workshop. And the fiber preparation section use DCS to achieve full automatic control of wet and dry preparation，using the basic batch cooking pot stand, long network of multi-cylinder papermaking machine used to dispose pulp after beating and adding additives, useing neutral and surface sizing conbined with serval additives technology in sizing section.For the section of washing, filtra- ting and bleaching process of workshop design,it were detaildely discussed the technology and equipment about it.Finally,considered with production of pulp properties,we elect the process of washing after disposed by pressure knotter,the process of oxygen delignification before two-stage closed screening process, and then through the purification enrichment afeter three-stage slaging and washing for bleaching. According to the degree of industrialization of bleaching technology, pulping method, performance require- ments of two sided offset paper, pollutant discharge standard and other aspects, the four-stage ODEP bleaching process,which is free from chlorine element,is determined. Ultimately,we choose the optimal combination afer comparison for a variety