震动喇叭.pdf

SPECIFICATION FOR DYNAMIC SPEAKER Customer Customer P/N Model Name T2-SRV15A-8-W030C0.3S-0.2S Product No. 8050701 Issue Date 08/05/07 Table of contents 1.SCOPE 2.GENERAL SPECIFICATIONS 3.SPEAKER MODE 4. VIBRATION MODE 5.RELIABILITY TESTS 6.STANDARD TEST CONDITIONS 7.JUDGEMENT TEST CONDITIONS 8.SPEAKER MODE MEASURING CIRCUIT 9.SPEAKER MODE FREQUENCY RESPONSE CURVE 10.PRODUCT OUTSIDE VIEW 11.PACKING METHOD Drawn by Checked by Approved by Customer approved For conform to the European Union Directive on the Restriction of Hazardous Substances(RoHS), this type of productions forbid use all the hazardous substances as follow: Lead Cadmium Mercury Hexavalent chromium Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers (PBDE) Tianer Technology (ShenZhen) Co.,Ltd. No.494jihua Road.bantian district, shenzhen guangdong Province,P.R.China Post:518000 Tel:+86 755 Fax:+86 755 Http:// info@ SPECIFICATION Page: 1/5 ISSUED DATE 2008-05-07 MODEL NO. T2-SRV15A-8-W030C0.3S-0.2S 1. SCOPE This specification is applied to the dynamic speaker for cellular handset? 2. GENERAL SPECIFICATIONS Mechanical Drawing 2.1 ?15±0.2mm×5±0.3mm as shown Fig3 With Dimensions 2.2 Weight Approx 2.9g 2.3 Operating Temperature -20??+70? 2.4 Storage Temperature -40??+70? 3. SPEAKER MODE 3.1 Impedance 8?±15% at 2000Hz 1.0V 3.2 Rated Input Power 0.6W 3.3 Max Input Power 1.0W must be no