交通灯控制系统模拟设计学位论文.docVIP

交通灯控制系统模拟设计 附件1：学 号： 0121018700XXX 课 程 设 计 题 目交通灯控制系统模拟设计学 院物流工程专 业物流工程班 级物流工程卓越1001姓 名XXX指导教师朱宏辉 2013年6月28日  交通灯控制系统模拟设计 XXX 武汉理工大学 物流工程卓越1001 摘要：随着经济发展，汽车数量急剧增加，城市道路日渐拥挤，交通拥塞已成为一个国际性的问题。因此，设计可靠、安全、便捷的多功能交通灯控制系统有极大的现实必要性。根据交通灯在实际控制中的特点，结合单片机的控制功能，提出了一种用单片机自动控制交通灯的简易方法。设计中包括硬件电路的设计和程序设计两大步骤，对单片机学习中的几个重要内容都有涉足。本系统采用AT89C51单片机为中心器件来设计交通灯控制器，实现了红绿灯循环点亮，倒计时剩5秒时黄灯闪烁警示（交通灯信号通过P1口输出，显示时间通过P0口输出至双位数码管）；以及实现3种工作模式：正常情况、繁忙情况、特殊情况及报警功能。本系统实用性强、操作简单、扩展功能强。 关键字：交通灯；AT89C51；数码管；三种工作模式 Design of traffic light control system simulation Zhiming Guo Logistics Engineering College Logistics zy1001 Abstract: With the development of economy, the sharp increase in the number of cars, increasingly crowded city roads, traffic congestion has become an international problem. Therefore, multi-function traffic light control system design of reliable, safe, convenient and of great practical necessity. According to the characteristics of traffic lights in the actual control, combined with the control function of single chip, this paper presents a simple method for automatic control of traffic lights with single chip microcomputer. In the design of hardware circuit design and program design includes two steps, on several important single-chip learning have to get involved in. The system centric devices to design the traffic light controller AT89C51, realizes the cycle traffic lights lit, countdown 5 seconds left when the yellow light flashing warning (traffic light signal output, display time through the output port P0 to two digital tube through the P1 port); 3 work modes: normal, busy and implementation situation, special circumstances and alarm function. The system practical, simple operation, strong function expansion. Key words: raffic lights, AT89C51, LED, three work modes  目录 TOC \o 1-3 \h \u  HYPERLINK \l _Toc4502 课程设计任务书  PAGEREF _Toc4502 1  HYPERLINK \l _Toc26312 第1章 前 言  PAGEREF _Toc26312 2  HYPERLINK \l _Toc16305 1.