污水处理厂设计-学位论文.doc

河南城建学院本科毕业设计 摘要 PAGE   PAGE \* MERGEFORMAT I 河南城建学院本科毕业设计 摘要 PAGE I II 摘要 近年来，国家和各地方对污水处理厂的排放标准要求越来越严格，选择能够稳定达到《城镇污水处理厂污染物排放标准》(GB18918-2002)中一级B标准的工艺是新建污水处理厂和老污水处理厂升级改造所面临的关键问题。本设计主要介绍了河南省濮阳市清丰县规模30000m3/d的城市污水处理厂的工艺流程、各构筑物的工艺设计和平面高程设计等。 关键词：污水处理厂 排放标准 工艺设计 河南城建学院本科毕业设计 Abstract  PAGE \* MERGEFORMAT II Abstract In recent years, national and local on wastewater treatment plant emissions standards is more and more strict, choose to be able to achieve stability of the urban wastewater treatment plant emissions standards (GB18918-2002) level of standard B process is new sewage treatment plant and old sewage treatment plant upgrading the key problem facing. This design is introduced ZhongMouXian zhengzhou city scale for 30000m3 /d city sewage treatment plant, the process flow of the various structures process design and major equipment. Keywords: sewage treatment plant emissions standards process design河南城建学院本科毕业设计 目录 PAGE 1 目录 TOC \o 1-3 \h \u  HYPERLINK \l _Toc29703 摘要  PAGEREF _Toc29703 I  HYPERLINK \l _Toc5875 1、绪论  PAGEREF _Toc5875 1  HYPERLINK \l _Toc1042 1.1 设计任务  PAGEREF _Toc1042 1  HYPERLINK \l _Toc6464 1.1.1设计水量  PAGEREF _Toc6464 1  HYPERLINK \l _Toc27015 1.1.2设计水质  PAGEREF _Toc27015 1  HYPERLINK \l _Toc6384 1.2 城市概况  PAGEREF _Toc6384 1  HYPERLINK \l _Toc31464 1.3处理程度的计算  PAGEREF _Toc31464 2  HYPERLINK \l _Toc20890 1.3.1溶解性BOD5的去除率  PAGEREF _Toc20890 2  HYPERLINK \l _Toc12321 1.3.2 CODcr的去除率  PAGEREF _Toc12321 2  HYPERLINK \l _Toc9059 1.3.3 SS的去除率  PAGEREF _Toc9059 2  HYPERLINK \l _Toc14604 1.3.4 总氮的去除率  PAGEREF _Toc14604 2  HYPERLINK \l _Toc5625 1.3.5 总磷的去除率