饮水机循环定时器的设计-学位论文.doc

大学本科生毕业设计（论文） PAGE  PAGE 36 大学毕业设计论文 ——饮水机循环定时器的设计 班级： 摘要 随着电子技术的发展和人民生活水平的提高，饮水机、电热水器等已经成为家庭的必备用品，但饮水机等电热产品反复加热造成的“千滚水”也成为影响人们身体健康的隐患,家庭建议不饮用桶装水和饮水机，两者长时间饮用都不好。 本课题介绍一种以单片机STC89C52和DS1302为核心的饮水机定时器,该定时器可用于解决饮水机等电热产品长时间通电引发的一些问题。该定时器可以用电子时钟来显示时间，并可以在任意时段用该定时器来进行定时。论文叙述了饮水机循环定时器的设计过程，首先分析并总结了定时器如何来实现定时的方法，从而设计总体方案，然后利用单片机和时钟芯片 DS1302来实现定时器的功能，并设计了相关的定时程序，最后通过所设计的定时器来实现节能控制和循环定时的功能。 关键词：节能控制，循环定时，DS1302 ABSTRACT With the development of electronic technology and peoples living standards improve，drinking fountains, electric water heater has become a family of essential supplies，water dispensers and electric products, such as repeated heating caused thousands of boiling water also affect the health of people hidden. The family does not recommend drinking bottled water and drinking fountains, the two long drinking is not good This subject introduction the microcontroller STC89C52 and DS1302 as the core of the water dispenser timer ，this timer can be used to solve the drinking fountains and other electric for a long time power caused some problems. This timer can be used to display electronic clock time, and at any time using the timer time. The paper describes the design process of the fountains cycle timer, firstly analyzes and summarizes the timer on how to achieve timing in order to design the overall program, and then use the microcontroller and the clock chip DS1302 timer function, and design timing procedures, and finally through the design of the timer energy saving control and the cycl