多层百货大楼学位论文.docVIP

 PAGE 47 苏州科技学院成人教育学院 毕业设计任务书 设计题目 苏州某多层百货大楼 院 (系) 土木工程学院 专 业 13土木工程（函授） 学生姓名 李海军 学 号 1342120131 起迄日期 2015年3月7日 ~ 2015年5月2日 设计地点 苏州科技学院 指导教师 劳裕华 职称 副教授 填写日期: 2015 年 5月 2 日 摘要 本设计主要进行了结构方案中横向框架某轴框架的抗震设计。在确定框架布局之后，先进行了层间荷载代表值的计算，进而求出在水平荷载作用下的结构内力（弯矩、剪力、轴力）。接着计算竖向荷载（恒载及活荷载）作用下的结构内力。找出最不利的一组或几组内力组合。 选取最安全的结果计算配筋并绘图。此外还进行了结构方案中的室内楼梯的设计。完成了平台板，梯段板，平台梁等构件的内力和配筋计算及施工图绘制。整个结构设计分为三个阶段，结构方案阶段，结构计算阶段和施工图设计阶段。 关键词： 框架 结构设计 抗震设计  Abstract The purpose of the design is to do the anti-seismic design in the longitudinal frames of axis 20. When the directions of the frames is determined, firstly the weight of each floor is calculated .Then the vibrate cycle is calculated by utilizing the peak-displacement method, then making the amount of the horizontal seismic force can be got by way of the bottom-shear force method. The seismic force can be assigned according to the shearing stiffness of the frames of the different axis. Then the internal force (bending moment, shearing force and axial force ) in the structure under the horizontal loads can be easily calculated. After the determination of the internal force under the dead and live loads, the combination of internal force can be made by using the Excel software, whose purpose is to find one or several sets of the most adverse internal force of the wall limbs and the coterminous girders, which will be the basis of protracting the reinforcing drawings of the components. The design of the stairs is also be approached by calculating the internal force and reinforcing such components as landing slab, step board and landing girder whose shop drawings are completed in the end. The structural design stage can be roughly divided into three stages, the structure of the programme stage, structural calculations of stage design and construction plans. Keywords : frames, structural design, anti-seismic design 目录 TOC \o