脚踏式玉米脱粒机设计毕业论文.docVIP

脚踏式玉米脱粒机 PAGE  PAGE 22 摘 要 本次设计玉米脱粒机工作原理就是利用板齿和脱粒辅助轴之间的相互挤搓实现脱粒，板齿安装在滚筒上，滚筒的主轴通过曲柄连杆机构和脚踏板相连。脱粒辅助轴是用于抵住玉米棒，并利于玉米棒在板齿和辅助轴之间滚动和滑动，从而实现脱粒。本设计重点是曲柄连杆机构的设计，以达到最优工况；滚筒、主轴、板齿和脱粒辅助轴的设计，还有排芯区和喂料装置——漏斗的设计。 设计各项参数达到预期目标，脱净率高、破碎率低、经济性好，尤其适合南方小面积种植农户使用。对减轻劳动强度，提高生产效率，减轻农民负担，增加收入有很大的意义。 关键词：脱粒机 脱粒滚筒 脱粒辅助轴 漏斗 abstract Design maize sheller operation principle to utilize board tooth and thresh, assist to crowd to rub with the hands and realize threshing each other axle this time, the board tooth is installed on the cylinder, the main shaft of the cylinder links up with the running-board through the crank connecting rod organization. Thresh, assist axle used for, support, live in maize to be excellent, benefit maize to be excellent in board tooth assisting axle roll and slip, thus realize threshing. This design focus is the design of a crank connecting rod organization, in order to reach the optimum operating mode; Cylinder, main shaft, board tooth and threshing to assist the design of the axle, still arrange the core district and feed the material device --Design of the funnel. Design every parameter reach re-set target, take off net rate high, broken rate low, economy is fine, especially suitable for the little area in the South and plant peasant households to use. To lightening labour intensity, improve production efficiency, lighten peasants burden, increase incomes and have very great meanings. Keywords: Sheller Cylinder threshing Extracts seeds the auxiliary axis Funnel 目录  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc230347322 引言  PAGEREF _Toc230347322 \h 2  HYPERLINK \l _Toc230347323 一.玉米脱粒机的工作原理  PAGEREF _Toc230347323 \h 4  HYPERLINK \l _Toc230347324 二.玉米脱粒机驱动机构的型式与最???工况的选择  PAGEREF _Toc230347324 \h 5  HYPERLINK \l _Toc230347325 2．1 驱动机构的作用与型式  PAGEREF _Toc230347325 \h 5  HYPERLINK \l _Toc230347326 2．2 驱动机构最优工况及曲柄最佳位值的选择  PAGEREF _Toc230347326 \h 8  HYPERLINK \l _Toc230347327 三.玉米脱粒机驱动机构设计技术要求  PAGEREF _Toc230347327 \h 8  HYPER