基于soildworks千斤顶的仿真模拟(设计)_毕设论文.docVIP

基于Soildworks千斤顶的仿真模拟 PAGE  基于Soildworks千斤顶的仿真模拟 摘 要 SolidWorks有全面的零件实体建模功能，在其模拟功能中，不仅可以做机构的运动分析，模拟机构的运行过程，还可同时将运动过程进行演示，并把这个运动过程制成avi格式的动画文件，用于诸多播放器中随时、随地地进行演示。运用Solidworks三维模拟仿真功能，对千斤顶进行零件的三维实体建模，并将零件的三维实体进行装配，再利用插件Animator制作动画，对千斤顶的装配体进行动画演示，做出它的爆炸图、解除爆炸图和模拟运动图。 关键字：Solidworks，模拟仿真，千斤顶 Simulation of Jack Based on Solidworks Abstract SolidWorks has the comprehensive components entity modelling function，its analogue function not only could make the movement analysis of the organization and can simulate the movement process of the organization, but also can simultaneously carry on the rate process of the demonstration and makes this rate process to be the avi form of the animation document, useing it in many players momentarily anywhere and anytime to erbilt carrying on the demonstration. Using the Solidworks’s function of three dimensional analog simulation, it carries on the components to the hoisting jack with the three dimensional entity modelling and to assemble the components with three dimensional entity , then using the plug-in unit Animator to manufacture animation, it use the animation demonstration again to hoisting jacks assembly body, makes its detonation chart, to relieve the detonation chart and the simulation motion diagram. Keywords: Solidworks, simulation, jack PAGE  目 录  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc230617161 1.绪论  PAGEREF _Toc230617161 \h 1  HYPERLINK \l _Toc230617162 2.模拟仿真  PAGEREF _Toc230617162 \h 1  HYPERLINK \l _Toc230617163 2.1模拟仿真的概念  PAGEREF _Toc230617163 \h 1  HYPERLINK \l _Toc230617164 2.2 模拟仿真在机械教学中的影响  PAGEREF _Toc230617164 \h 2  HYPERLINK \l _Toc230617165 2.2.1 传统机械教学中存在的问题  PAGEREF _Toc230617165 \h 2  HYPERLINK \l _Toc230617166 2.2.2 教学改革的途径和方法  PAGEREF _Toc230617166 \h 2  HYPERLINK \l _Toc230617167 3. Solidworks的模拟仿真  PAGEREF _Toc230617167 \h 3  HYPERLINK \l _Toc230617168 3.1 Solidworks模拟仿真的基本概述  PAGEREF _Toc230617168 \h 3  HYPERLINK \l _Toc230617169 3.2 Solid