ICND-04A.pptVIP

目标;Cisco IOS 支持各类网络服务及网络应用;网络设备配置; ;配置文件可以从多个源中获得 配置文件在内存中生效;Uses a command line interface Operations vary on different internetworking devices Type or paste entries in the console command modes Enter key instructs device to parse and execute the command Two primary EXEC modes are user mode and privileged mode Command modes have distinctive prompts;User Mode Limited examination of switch or router Command Prompt is hostname;Privileged (or enabled) Mode Detailed examination of switch or router Enables configuration and debugging Prerequisite for other configuration modes Command prompts on the device hostname#;Cisco IOS 软件 EXEC模式;系统从交换机软件中进行初始启动 初始启动采用缺省的配置参数;检查交换机的 LED 指示灯;Switch LED Description System LED Green - System powered and operational Amber - System malfunction Redundant power supply (RPS) Green - RPS operational Amber - RPS installed, not operational Flashing amber - Indicates that the internal power supply and RPS are powered up, and the internal power supply is powering the switch. ;Port LED display mode Description Port Status (STAT LED on) Green - Link present, flashing green - activity Alternating green and amber - Link fault Amber - Port not forwarding Bandwidth utilization (UTL LED on) 1 to 8 LEDs on-0.1 to 6 Mbps