Lorentzian型布里渊频谱特征提取时模型的影响.pdfVIP

第 45 卷第 5 期 红外与激光工程 2016 年 5 月 Vol.45 No.5 Infrared and Laser Engineering May 2016 Influence of optimization model on parameter extraction in Lorentzian Brillouin scattering spectrum Zhao Lijuan1, Li Yongqian1, Xu Zhiniu2 (1. Department of Electronics Communication Engineering, North China Electric Power University, Baoding 071003, China; 2. Hebei Provincial Key Laboratory of Power Transmission Equipment Security Defense, North China Electric Power University, Baoding 071003, China) Abstract: To select the best optimization model on parameter extraction in Lorentzian Brillouin scattering spectrum and improve the accuracy of the temperature or strain measurement, taking the objective functions based on linear and nonlinear least鄄squares fits as the study objects, the influence of the optimization model on the accuracy of the parameter extraction was systematically investigated. Brillouin scattering spectrum signals with different signal鄄to鄄noise ratios, scanned frequency intervals, g0, vB and vB were numerically generated. The accuracy and computing time of parameter extraction and 驻 temperature/strain measurement of the linear model were compared to that of the nonlinear model. The results reveal that, if the signal is ideal and free from noise, the two models are free of any errors. The errors of the two models will increase with increasing in noise level/scanned frequency interval. However, the error of the nonlinear model is appreciably lower than that of the linear one. In engineering practice the nonlinear model should be selected. The analysis is validated with the experimental Brillouin scattering spectrum signals. Key