两相区各相激活能对Zr-2.5Nb-0.5Cu合金本构方程的影响.pdfVIP

Trans. Nonferrous Met. Soc. China 27(2017) 172?183 Role of activation energies of individual phases in two-phase range on constitutive equation of Zr?2.5Nb?0.5Cu alloy K. K. SAXENA1,4, S. K. JHA2, V. PANCHOLI1, G. P. CHAUDHARI1, D. SRIVASTAVA3, G. K. DEY3, N. SAIBABA2 1. Department of Metallurgical and Materials Engineering, Indian Institute of Technology, Roorkee-247667, Uttarakhand, India; 2. Nuclear Fuel Complex Limited, Hyderabad-501301, India; 3. Materials Science Division, Bhabha Atomic Research Center, Mumbai-40085, India; 4. Department of Mechanical Engineering, Insitute of Engineering and Technology, GLA Uinversity, Mathura-281406, Uttar Pradesh, India Received 16 January 2016; accepted 6 May 2016 Abstract: Dominant phase during hot deformation in the two-phase region of Zr?2.5Nb?0.5Cu (ZNC) alloy was studied using activation energy calculation of individual phases. Thermo-mechanical compression tests were performed on a two-phase ZNC alloy in the temperature range of 700?925 °C and strain rate range of 10?2?10 s?1. Flow stress data of the single phase were extrapolated in the two-phase range to calculate flow stress data of individual phases. Activation energies of individual phases were then calculated using calculated flow stress data in the two-phase range. Comparison of activation energies re