凝汽器组安装焊接作业指导书.doc

CSPC Nanhai Petrochemicals Project SEPCO Electric Power Construction Corp. PAGE   FILENAME 3869552-58fdd5e13dc7b.doc Page  PAGE 17 of  NUMPAGES 17 CSPC NANHAI PETROCHEMICALS PROJECT 南 海 石 化 项 目 Work Instruction For Condenser Welding 凝汽器组合安装焊接作业指导书 WORKING INSTRUCTION: WI-8710-8100-0098 SEPCO Electric Power Construction Corporation 山东电力基本建设总公司 SEPCO REVDATEREASON FOR ISSUEBYCHK’DREVIEWAPPRA26.FEB.2004Issued for ApprovalX.WZHAO S.LXIAO T.PTIAN G.HB20.MAY.2004Issued for ApprovalX.WZHAO S.LXIAO T.PTIAN G.H0027.MAY.2004Issued for use X.WZHAO S.LXIAO T.PTIAN G.H 目 录 TABLE OF CONTENS 1工程概况PROJECT GENERAL DESCRIPTION 2编制依据REFERENCES 3职责RESPONSIBILITIES 4施工准备PREPARATION FOR CONSTRUCTION 5 资源配置resource allocation 6施工工序和施工方法WORKING PROCEDURE AND METHOD 7附录 Appendix 修改记录 Revision Information 版次Ver.章节号Section No.主要修改内容 Description of main changesB4.9点焊使用的焊条和焊接要求与正式焊接相同。 The welding rod used for spot welding and the welding requirement are the same as the formal welding. 1工程概况PROJECT GENERAL DESCRIPTION 1.1汽电联产项目汽轮机厂房凝汽器共有4台，供货时主要分膨胀节、壳体、热井三大部分整体供货。安装顺序：热井就位→凝汽器壳体拖运轨道的安装→凝汽器吊装至拖运轨道上→凝汽器壳体拖运→壳体顶起、轨道拆除→壳体就位找正→热井与壳体连接→膨胀节就位并与壳体初找正→膨胀节与汽缸连接→凝汽器最终定位焊接→凝汽器附件安装。 There are 4 condensers in turbine building for SP unit project, supply the cargo dividing mostly into three parts as follows: expansion joint, shell, heat sink, and treat them as the integer. The erection sequence is as follows: Location of heat sink →Erection of shell hauling track for condenser → lift the condenser onto the hauling track → hauling the condenser shell →lifting the shell and removing the track → location and alignment of shell → jointing for heat sink and shell → the expansion joint locates and primitively aligns with the shell →jointing for expansion and cylinder → final location and welding of condenser →accessory installation of