RETRAN-3D程序PWR DNB模型评价研究.pdfVIP

Nuclear Science and Technology 核科学与技术, 2016, 4(2), 33-40 Published Online April 2016 in Hans. /journal/nst /10.12677/nst.2016.42005 Evaluation Study of the PWR DNB Model in the RETRAN-3D Code Jiange Liu1, Yisong Hu1, Jinhong Zhang2, Xiaohua Jiang1 1China Nuclear Power Technology Research Institute, Shenzhen Guangdong 2Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai Received: Apr. 9th, 2016; accepted: Apr. 21st, 2016; published: Apr. 27th, 2016 Copyright ? 2016 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract The paper separately chooses four critical heat flux correlations in the RETRAN-3D code which is used for Pressurized Water Reactor (PWR) Departure Nucleate Boring (DNB) calculation. Based on the international 5 × 5 pressurized water reactor fuel assembly critical heat flux experimental data used for input thermal parameters, 35 total experimental cases with widely pressure range of high, middle, low pressure are calculated to obtain the Minimum DNBR (MDNBR) results. The re- sults of RETRAN-3D code are compared with the basically exactly value from sub-channel code FLICAIII-F. The calculation accuracy of the W-3, BW-2, MacBeth and Bowring formula in a wide range of pressure is specially analyzed. The results show that, the accuracy of the W-3 formula in a wide range of pressure is better than the other three formulas, and its results are most close to the sub-channel code results in the high and middle pressure range. It is acceptable for BW-2 for- mula in the high and middle pressure range, but the deviation i