dsp28335 2812 hall3_drv.pdfVIP

HALL3_DRV Hall effect interface driver for sensored BLDC control Description This module produces a commutation trigger for a 3-ph BLDC motor, based on hall signals received on capture pins 1, 2, and 3. Edges detected are validated or debounced, to eliminate false edges often occurring from motor oscillations. Hall signals can be connected in any order to CAPs1-3 for 281x or ECAPs1-3 for 280x. The software attempts all (6) possible commutation states to initiate motor movement. Once the motor starts moving, commutation occurs on each debounced edge from received hall signals. CAP1 CmtnTrigHall EV HALL3_D CAP2 RV HallMapPointer H/W CAP3 Availability This 16-bit module is available in one interface format: 1) The C interface version Module Properties Type: Target Dependent, Application Independent Target Devices: x281x or x280x C Version File Names: f281xhall3.c, f281xhall3.h (for x281x) f280xhall3.c, f280xhall3.h (for x280x) IQmath library files for C: N/A Item C version Comments Code Size□ 215/324 words (x281x/x280x) Data RAM 0 words?