LowIQ,38VSynchronous.PDF

LTC7812 Low IQ, 38V Synchronous Boost+Buck Controller Features Description n Synchronous Boost and Buck Controllers The LTC ?7812 is a high performance synchronous n When Cascaded, Allows VIN Above, Below or Equal Boost+Buck DC/DC switching regulator controller that to Regulated VOUT drives all N-channel power MOSFET stages. It contains n Output Remains in Regulation Through Input Dips independent step-up (boost) and step-down (buck) control- (e.g., Cold Crank) Down to 2.5V lers that can regulate two separate outputs or be cascaded n Wide Bias Input Voltage Range: 4.5V to 38V to regulate an output voltage from an input voltage that n Low Input and Output Ripple can be above, below or equal to the output voltage. The n Low EMI LTC7812 operates from a wide 4.5V to 38V input supply n Fast Output Transient Response range. When biased from the output of the boost regulator, n High Light Load Efficiency the LTC7812 can operate from an input supply as low as n Low Operating IQ: 33μA (Both Channels On) 2.5V after start-up. The 33μA no-load quiescent current n Low Operating IQ: 28μA (Buck Channel On) extends operating run time in battery-powered systems. n RSENSE or Lossless DCR Current Sensing Unlike conventional buck-boost regulators, the LTC7812’s n Buck Output Voltage Range: 0.8V ≤ VOUT ≤ 24V cascaded Boost+Buck solution has continuous, non- n Boost Output Voltage Up to 60V pulsating, input and output currents, substantially reducing n Phase-Lockable Frequency (75kHz to 850kHz) voltage ripple and EMI. The LTC7812 has independent n Small 32-Pin 5mm × 5mm QFN Package feedba