毕业设计（论文）-富康车门外板模具设计.docVIP

PAGE  PAGE  毕业设计 富康车门外板模具设计 学生姓名： 学 号： 专业班级： 指导教师： 2010年6月20日摘 要 本文所研究的汽车覆盖件的数字化建模，在现代汽车制造业中起到了非常重要的作用。本文以富康牌小轿车左后门作为研究对象，进行了车门的曲面逆向重构及车门覆盖件模具设计。 文章对车门外板利用三维激光扫描仪进行三维坐标测量得到点云数据，对所得点云数据使用逆向工程软件CATIA进行预处理。包括点云的抽稀、修剪、补洞、形成三角网格等；用CATIA软件对其进行逆向工程加工，即进行曲面重构，得到重构出的车门曲面；以重构出的曲面为基础，对车门外板的拉伸模具进行结构设计，在SolidWorks软件中做出凸模、凹模和压料圈等结构；在此基础上，计算拉伸模具的冲压过程中模具的受力情况，利用SolidWorks软件中的Simulation对拉伸模具进行有限元分析。 关键词：汽车覆盖件；逆向工程；拉伸模具；有限元分析 ABSTRACT This task is about the Digitized Modeling of the automobile panels, which plays an important role in the Automobile Manufacture in modern times. In this article, we select the left back door to carry on a series of investigation including surface reconstruction and drawing dies. In this thesis, we use the Three-dimensional to scan the car door panels, and we achieve the point cloud. Then we choose CATIA, which is a high-class software of Inverse Engineering, to process the data. Next ，it’s the processing of the point cloud and surface reconstruction. As the surface finished, the drawing dies need to be modeled. To meet the challenge, we construct them by the software of SolidWorks. There are three parts in the drawing dies, which are punch, die and blank-holder. On the basic of the drawing dies, we need to analyze the load-carrying capability of the drawing dies. As a result, there is some CAE Analysis by SolidWorks Simulation. Keywords: Automobile Panels, Inverse Engineering, Drawing Dies, CAE Analysis  目录 TOC \o 1-3 \h \z \u   HYPERLINK \l _Toc265051212 第一章 概论  PAGEREF _Toc265051212 \h 1  HYPERLINK \l _Toc265051213 1. 课题内容及意义  PAGEREF _Toc265051213 \h 1  HYPERLINK \l _Toc265051214 2. 汽车覆盖件国内外研究现状  PAGEREF _Toc265051214 \h 1  HYPERLINK \l _Toc265051215 2.1 国外研究现状与分析  PAGEREF _Toc265051215 \h 2  HYPERLINK \l _Toc265051216 2.2 国内研究现状与分析  PAGEREF _Toc265051216 \h 2  HYPERLINK \l _Toc265051217 3. 逆向工程的发展状况  PAGEREF _Toc265051217 \h 3  HYPERLINK \l _Toc265051218 4. 现代汽车模具工业发展趋势  PAGEREF _Toc265051