毕业设计（论文）-五阳煤矿1.8Mta新井通风安全设计.doc

摘 要 本毕业设计包括三部分：一般部分、专题部分和翻译部分。 一般部分为五阳煤矿1.8Mt/a新井通风安全设计。潞安矿业集团五阳煤矿位于山西省襄垣县境内。矿井南北走向长度最长为5.4km，最短为4.8km，平均长度约为5.1km；而东西倾向最长约为10.3km，最短约为6.7 km，平均长8.5km，矿井总面积约为43 km2。井田工业储量为219.5Mt，矿井可采储量为153.79Mt，服务年限为61年。矿井采用立井开拓。 矿井前期采用中央边界式通风方式，后期采用中央并列式通风方式。主要通风机型号为2K56-NO.30型，配套电动机型号为JS158-6。矿井在通风容易时期总进风量为108.68m3/s，通风阻力为1083.65Pa，等积孔位3.75m2。矿井在通风困难时期总进风量为126.55m3/s，通风阻力为2023.38Pa，等积孔位3.19m2。 由于矿井瓦斯涌出量较大，对煤矿的生产和安全不利影响，对全矿的通风系统安全进行监控监测。 专题部分是对五阳煤矿综放工作面瓦斯综合治理的探讨。采用本煤层预抽、裂隙带抽采、千米钻机裂隙带抽采、CO2预裂增透以及新技术、新设备，新工艺的简述。 翻译部分：为增强煤矿瓦斯事故管理的瓦斯抽放现场模拟实验。 关键词：五阳煤矿；矿井通风安全设计；安全监测监控；瓦斯治理。 ABSTRACT The design includes three parts: general design, the special topic part and translation part. The general part is a safety design of new ventilation system in WuYang coal mines, annual production of which is 1.8 million tones. Wuyang coal mines of Luan Mining Group located in the Xiangyuan county, Shanxi province.The width of mine filed from east to west is about 10.3km and the north-south length is 4.8～5.4km , average 5.1km. Mining coal is NO.3 coal seam, the coal seam dip angle of which is 4°~8°, average 5°, so they belong to nearly horizontal seam.The total area of mine filed id 43km2. The mine’s industrial reserves is 219.5Mt and recoverable reserves is 153.79Mt, whose expected life of the mine is 61 years. Shaft development is shoosed to the mine. The advance ventilation system of mine is the central border ventilation and ventilation post is retrograde ventilation.The main fan chooses 2K56-NO.30 and the type of mating electric machine is JS158-6. During ventilating easy period, total inhaling air volume amounts of the mine is 108.68m3/s and the mine ventilation resistance is 1083.65Pa .The equivalent orfice covers is 3.75m2. During ventilating difficult period, total inhaling air volume amounts of the mine is 126.55m3/s and the mine ventilation resistance is 2023.38Pa. The equivalent orfice covers is 3.19m2. As the larger mine gas emission in coal mine, which affect both safety and productivity, On