毕业设计（论文）-NJP1200型胶囊充填机转塔机构设计（全套图纸三维）.doc

摘要： 胶囊填充机集机、电、气为一体，采用微电脑可编程控制器，触摸面板操作，变频调速，配备电子自动计数装置，能分别自动完成胶囊的就位、分离、充填、锁紧等动作，减轻劳动强度，提高生产效率，符合制药卫生要求。本机动作灵敏，充填剂量准确，结构新颖，造型美观，操作方便，适用于充填各种国产或进口胶囊。是目前制药行业充填胶囊药品的经济实用型设备。 全套图纸，加153893706 Abstract： Capsule filling machine, electricity, gas for one, using micro programmable controllers, touch screen, frequency control, automatic counting device with a place that can automatically capsules, separation, filling, locking action, reduce labor intensity and improve production efficiency meet the medical and health requirements. Sensitive, accurate filling dosage, novel structure, beautiful appearance, easy operation, suitable for filling a variety of domestic and imported capsules. At present, the pharmaceutical industry is a device used to fill capsules drugs economical and practical.  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc388591966 目录：  PAGEREF _Toc388591966 \h 2  HYPERLINK \l _Toc388591967 一，胶囊填充机的介绍  PAGEREF _Toc388591967 \h 2  HYPERLINK \l _Toc388591968 1.1胶囊填充机的现状  PAGEREF _Toc388591968 \h 2  HYPERLINK \l _Toc388591969 1.2胶囊填充机的组成  PAGEREF _Toc388591969 \h 4  HYPERLINK \l _Toc388591970 二，设计方法  PAGEREF _Toc388591970 \h 6  HYPERLINK \l _Toc388591971 2.1转塔设计思路  PAGEREF _Toc388591971 \h 6  HYPERLINK \l _Toc388591972 2.1.1转动方案的确定  PAGEREF _Toc388591972 \h 6  HYPERLINK \l _Toc388591973 2.1.2传动方案的确定  PAGEREF _Toc388591973 \h 9  HYPERLINK \l _Toc388591974 2.2电机的计算及选用  PAGEREF _Toc388591974 \h 10  HYPERLINK \l _Toc388591975 2.3齿轮的计算及选用  PAGEREF _Toc388591975 \h 11  HYPERLINK \l _Toc388591976 2.4轴承的选用  PAGEREF _Toc388591976 \h 12  HYPERLINK \l _Toc388591977 2.5带轮的选用  PAGEREF _Toc388591977 \h 13  HYPERLINK \l _Toc388591978 2.6皮带的设计计算  PAGEREF _Toc388591978 \h 14  HYPERLINK \l _Toc388591979 三，Proe建模及运动仿真  PAGEREF _Toc388591979 \h 14  HYPERLINK \l _Toc388591980 3.1Proe简介  PAGEREF _Toc388591980 \h 14  HYPERLINK \l _Toc388591981 3.2建模效果图  PAGEREF _Toc388591981 \h 16  HYPERLINK \l _Toc3