毕业设计（论文）-200-2型钢塑自动分离机的设计（全套图纸）.doc

PAGE ii  PAGE \* MERGEFORMAT I 200-2型钢塑自动分离机的设计 摘要 200-2型钢塑自动分离机是一种钢塑自动分离抛光装置，该装置能有效实现钢塑分离；生产效率高；脱塑后的钢板可用来制造适应于电镀的零件，抛光后的钢板无残留粘结剂；生产成本低。 本课题主要是对钢塑自动分离抛光装置进行结构设计，满足分离机速度无级可调，同时实现宽度200mm以内、厚度2mm以内、长度不限的废旧贴塑钢板中钢与塑料自动分离，从而实现钢板与塑料的分别回收利用。 关键词：钢塑自动分离抛光装置，钢板，塑料，自动分离 全套图纸，加153893706 PAGE iii The design of 200-2 type steel automatic separator ABSTRACT 200-2 type steel automatic separator is a device for automatic separation of polished steel, the device can effectively realize the separation of steel; high production efficiency; and after the plastic steel plate can be used to make suitable for electroplating parts, after polishing plate without residual binder; low production cost. The main task is to design the structure of the automatic separation of polishing device, separator meet stepless adjustable speed, while achieving width less than 200mm and the thickness of less than 2mm, no limit on the length of waste plastic plate steel and plastic automatic separation, so as to realize the steel and plastic recycling respectively. KEY WORDS: automatic polishing device, plastic plate, plastic, automatic separation PAGE 27  INDEX \h —M— \o S \c 2 \z 2052 目录  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc418761417 200-2型钢塑自动分离机的设计  PAGEREF _Toc418761417 \h i  HYPERLINK \l _Toc418761418 摘要  PAGEREF _Toc418761418 \h i  HYPERLINK \l _Toc418761419 ABSTRACT  PAGEREF _Toc418761419 \h ii  HYPERLINK \l _Toc418761420 1绪论  PAGEREF _Toc418761420 \h 3  HYPERLINK \l _Toc418761421 1.1钢塑自动分离机的应用  PAGEREF _Toc418761421 \h 3  HYPERLINK \l _Toc418761422 1.2钢塑自动分离机的特征及其工作原理  PAGEREF _Toc418761422 \h 3  HYPERLINK \l _Toc418761423 1.2.1钢塑自动分离机的特征  PAGEREF _Toc418761423 \h 3  HYPERLINK \l _Toc418761424 1.2.2钢塑自动分离机的工作原理  PAGEREF _Toc418761424 \h 4  HYPERLINK \l _Toc418761425 1.3钢塑自动分离机的发展趋势  PAGEREF _Toc418761425 \h 4  HYPERLINK \l _Toc418761426 2 200-2钢塑自动分离机的设计要求及减速机的选择  PAGEREF _Toc418761426 \h 6  HYPERLINK \l _Toc418761