Myopia Comparison of central corneal thickness measurement.doc

 PAGE \* MERGEFORMAT 13 Myopia Comparison of central corneal thickness measurement 【Abstract】 Objective To investigate the pre-LASIK Orbscan Ⅱ corneal topography system and ultrasonic corneal thickness measured by corneal thickness differences. Methods 200 cases (400 eyes) in patients with refractive errors were applied Orbscan Ⅱ and ultrasonic corneal thickness measurement of central corneal thickness. Results According to the different refractive groups, low-grade array of ultrasonic thickness measurement of (547.46 ± 40.83928) μm, Orbscan Ⅱ thickness of (578.15 ± 39.543) μm. Moderate array of ultrasonic thickness measurement of (535.03 ± 26.58376) μm, Orbscan Ⅱ thickness of (567.74 ± 29.8175) μm. An array of ultrasonic thickness measurement of height (530.9 ± 29.94793) μm, Orbscan Ⅱ thickness of (562.6 ± 31.01522) μm. Ultra-high array of ultrasonic thickness measurement of (537.74 ± 36.47294) μm, Orbscan Ⅱ thickness of (569.26 ± 36.00943) μm. Difference between the two was significant (t test, P lt;0.01). Conclusion Orbscan Ⅱ corneal topography system and ultrasonic corneal thickness measured by the results of corneal thickness are quite different aspect in the measurement of corneal thickness is also not a substitute for ultrasonic thickness measurement can be used as reference. Keywords: Orbscan Ⅱ; ultrasonic corneal thickness; corneal thickness Orbscan Ⅱ corneal topography system is the use of scanning technology and advanced fracture Placido Disc system, the combination is widely used in the corneal shape, corneal thickness, anterior chamber depth measurements equipment. Corneal refractive surgery in the preoperative screening and postoperative follow-up and surgical evaluation of the safety aspects of considerable significance. The ultrasonic thickness measurement is the traditional recognized more accurate corneal thickness measurement method to compare the two measurements will now be observed for clinical reference, the results r