需要设计确认的问题—汇总.doc

Comments List--Need To Be Discussed With Design 土建方面Civil 建筑部分：Architectural Part 1.加气混凝土砌块建议改用空心砖。 Air-entrained concrete block is recommended to use hollow brick. 2.关于土压实系数建议都用0.93。 Soil compaction rate is recommended to be 0.93. 3.PEHV区域墙的高度没有定义。 There’s no height requirement in PEHV area. 结构部分：Structural Part 1.建筑与结构中关于隔墙卧梁高度不一致。（300/190） There’s different concrete ridge of the wall height in construction structure. 2.JC-10基础平面尺寸与基础一览表中的不一致。 JC-10 foundation plane size is inconsistent with foundation table. 3.空压站冷水机房SK093-3T1-34图纸上关于罐基础预留孔未做出修改。 There’s no modification about tank foundation reserved manhole on air compressed station chiller room SK093-3T1-34 drawing. 4.墙与柱之间关于拉结筋的处理没有定义。 There’s no requirement of tie-rebar between wall pillars. 5.檩条埋件标高与预埋件现有位置标高不一致。 Purlin reserved steel pieces elevation is inconsistent with the elevation of reserved steel pieces constructed. 6.PEHV区域墙和抗风柱无基础。 There’s no foundation of wall wind resistant pillars in PEHV area. 7.厂房内附属用房SK093-3T1-30基础图不详细。（关于柱脚与基础连接部分） Head building SK093-3T1-30 foundation drawing is not detailed. (About connection part between pillar bottom foundation) 8. SK093-3T1-5；SK093-3T1-11；SK093-3T1-14；SK093-3T1-15；SK093-3T1-16 图上的大斜线是否代表取消了。 Whether big diagonal lines on SK093-3T1-5, SK093-3T1-11, SK093-3T1-14, SK093-3T1-15 and SK093-3T1-16 drawing means they’re canceled. 9. SK093-3T1-24楼板模板配筋图中负筋为①②⑤⑦标注了钢筋的型号与间距，剩下的负筋都未定义，其图纸说明和总说明也未定义。 There’s no floor slab rebar style space requirement except ①②⑤⑦ in SK093-3T1-24 floor slab template rebar drawing, either in drawing description drawing general description. 10.部分建筑与结构图纸没有中英文对照说明。 Some construction drawing structural drawing are not translated into English. 机械方面Mechanical Questions 共同问题：Common： 需增加车间内所有管线综合布置图（含通风管道，采暖管道，冷却水管道，压缩空气管道，消火栓管道，电气桥架等）。并在车间内东西方向取2道轴线做剖面图。并提交车间管线工作界面详图 All pipelines’ layout need to be added(including ventilation pipes, heating pipes, cooling water pipes, compressed air pipes, fire hydrant pipe a