冷轧机压下装置的设计--毕业论文.docVIP

摘要 洛阳理工学院毕业设计（论文） PAGE IV  PAGE 4 冷轧机压下装置的设计 摘 要 这篇毕业设计的论文主要阐述的是一套系统的关于冷轧机压下装置及蜗轮蜗杆的设计方法。环面蜗轮蜗杆减速器是蜗轮蜗杆减速器的一种形式.也是冷轧机压下装置的主要部件，这个方法是以加工过程和冷轧机压下装置及蜗轮减速器的使用条件的数学和物理公式为基础的。 在论文中，首先，对冷轧机压下装置作了简单的介绍，接着，阐述了压下装置及蜗轮蜗杆的设计原理和理论计算。然后按照设计准则和设计理论设计了压下装置及环面蜗轮蜗杆减速器。接着对压下装置和减速器的部件组成进行了尺寸计算和校核。该设计代表了压下装置及环面蜗轮蜗杆设计的一般过程。对其他的压下装置和蜗轮蜗杆的设计工作也有一定的价值。 目前，在压下装置和环面蜗轮蜗杆减速器的设计、制造以及应用上，国内与国外先进水平相比仍有较大差距。国内在设计制造压下装置和环面蜗轮蜗杆减速器过程中存在着很大程度上的缺点 关键词：压下装置，冷轧机，蜗轮蜗杆减速器 THE PUIIED DOWN OF STEEL ROOLLING DESIGN ABSTRACT This graduation thesis on the design of the system is a ring on the surface of the worm reducer and the cold pulled down design method. Torus worm reducer worm reducer is a form of this method is worm reducer and processing conditions of the use of mathematical and physical basis of the formula. In the paper, first of all, the worm made a brief introduction, then the worm on the design principle and the theoretical calculation. Then in accordance with the design criteria and design theory designed toroidal worm reducer. Then the components of the reducer to the size of the calculation and verification. The design represents the torus worm general design process. On the other worm in the design work will have value. At present, the torus worm reducer for the design, manufacture and application of domestic and foreign advanced level there are still large gaps between the comparison. Central China in the design and manufacture of worm reducer there is a process to a large extent the shortcomings, as revealed by the paper, important issues such as: cutting the root of the tooth; KEY WORDS: Pressure device, cold pulled down，worm reducer, 前言 目　录  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc264545340 前　言  PAGEREF _Toc264545340 \h 1  HYPERLINK \l _Toc264545341 第1章 压下装置的设计与计算  PAGEREF _Toc264545341 \h 3  HYPERLINK \l _Toc264545342 第2章 压下装置减速器的选择  PAGEREF _Toc264545342 \h 5  HYPERLINK \l _Toc264545343 2.1减速器的作用  PAGEREF _Toc264545343 \h 5  HYPERLINK \l