AnalysisPlantLayoutDesignforEffectiveProduction-IAENG.pdfVIP

Analysis Plant Layout Design for Effective Production Anucha Watanapa, Phichit Kajondecha, Patcharee Duangpitakwong , and Wisitsree Wiyaratn plant layout design for denture manufacturing. The suitable Abstract—This research aims to improve the plant layout of 4 plant layout models were designed and compared the pulley’s factory to eliminate obstructions in material flow and efficiency of each plant by adjacency-based scoring. thus obtain maximum productivity. The present plant layout Moreover, line balancing was done to allocate human and the operation process of each section (i.e. sand mold, core resource by using simulation programming (Arena 10) to ware house, core making, disassembly surface finishing, find the increasing productivity of the new improvement furnace, and inspection sections) have been investigated. The layout. These thus reflect the importance of the plant layout problem in term of material flow of each operation section was indentified. The result showed that disassembly surface design to bring about an increase in productivities. Yet, plat finishing and inspection sections should be allocated to make layout design is complicated due to many related factors the good material flow. The suitable of new plant layout can such as employees, workflow, machine positions, and the decrease the distance of material flow, which rises production. relationshi