670MW火电机组锅炉水压试验剖析.docx

1.编制依据1. Basis of compilation 1.1《电力建设施工质量验收及评定规程第2部分：锅炉机组》DL/T5210.2-20091.1 “Quality acceptance and evaluation regulations for Electric power construction(the second part:Boiler unit) ”DL/T5210.2-20091.2《电力建设施工技术规范第2部分：锅炉机组》DL/T5190.2-20121.2 “Electrical power construction technical manual, the second part:boiler Unit” DL 5190.2-20121.3《火力发电厂汽水管道设计技术规定》DL/T5054-19961.3“Technical regulation of the Thermal power plant steaming-water piping design” DL/T5054-19961.4《电力建设施工质量验收及评定规程第5部分：管道及系统》DL/T 5190.5-20121.4“Quality acceptance and evaluation regulations for electric power construction engineer (the fifth part: pipeline and system) ” DL/T 5190.5-20121.5《电力基本建设热力设备化学监督导则》DL/T 889-20041.5“Guide of chemistry supervision of thermalequipmentsfor power station capital construction” DL/T 889-20041.6《火力发电厂焊接技术规程》DL/T869-2012；1.6《The thermal power plant welding technical regulation》 DL/T869-2012；1.7《ASME动力管道》B31.1-20101.7“ASME CODE FOR POWER PIPING”B31.1-20101.8《电力建设安全工作规程第1部分：火力发电厂》DL5009.1-2002；1.8“Power plant construction security standard” DL5009.1-2002；1.9《工程建设强制性条文(电力工程部分)2011版》；1.9“Engineering construction compulsory provisions ”（electricity part）2011；2.0《锅炉说明书·锅炉安装》（哈尔滨锅炉厂有限责任公司编制）2.0“Boiler specification ·boiler installation”(Harbin boiler plant Co., Ltd, preparation)2.1《锅炉本体说明书》（哈尔滨锅炉厂有限责任公司编制）2.1“Boiler proper specification”(Harbin boiler plant Co., Ltd, preparation)2.作业范围及工程量2 Construction scope and engineering quantity 2.1工程概况2.1 Project profile电厂1×670MW机组锅炉是哈尔滨锅炉厂有限公司，根据哈锅自主研发技术设计、制造的超临界锅炉。该锅炉为变压运行、一次中间再热、单炉膛、平衡通风、固态排渣、全钢架悬吊结构、露天布置的“π”型超临界直流锅炉。带有内置式再循环泵的启动系统，采用低NOX燃烧技术，24只燃烧器分6层布置，采用切圆燃烧方式，配北京电力设备总厂6台ZGM133G-Ⅱ中速磨煤机直吹式制粉系统，锅炉在BMCR工况下，5运1备。1 × 670MW unit boiler belongs to Harbin boiler plant co., Ltd., and it is supercritical boiler designed and manufactured according to technology independent researched by the Harbin boiler plant co., Ltd.This boiler is ‘π’type supercritical once-through boiler of variable pressure operation, once reheating, single furnace, bala