机电1体化本科班专业英语试卷.docVIP

------------ 共3页第3页 Part Ⅱ Fill in the blanks according to the passages we have learned： (10 %) 1. The ability to support weight without bending or breaking is 2. Tolerance may be either or . 3. is a process that is similar to planning wood with a carpenter’s plane. 4. can machine a piece of metal with a tool which has multiple rotating cutting edges. 5. The most common used cutting tools used on lathe are , , , . 6. Among hydraulic, pneumatic and electric drive machines, model is usually the most expensive, model is often the least expensive, and model is the most applicable for presion jobs. 7. There are two types of control systems on CNC machines: open-looped and control systems. 8. The is capable of storing a number of preset tools which can be automatically called for use by the part program. 9. The simple example of PTP system is machine. Part Ⅲ Complete the following sentences by translating the Chinese in the brackets into English. (10 %) Since these materials generate , they are most suitable for measuring force-derived variables. （一个与施加力成比例的输出电荷） 2. These employ of a coil moving in a magnetic field. (一个广为人知的发电机原理) 3. , because of the small size of thermocouple . （局部点的温度可以被测定） 4. A transducer is a device which an optical, mechanical, or more commonly-electrical signal. （把被测量转换为） 试卷类型 A卷 考　　场 班 级 姓 名 学 号 注意事项： 1、考生要正确清楚的填写以上栏目。 2、如因填写错误、不清楚等造成不良后果者