abaqus系列之2维图形导出.doc

如何通过二维odb或者inp文件网格导出二维图形，进而extrude生成三维网格。 答案：script命令： PartFromOdb(...) PartFromInstanceMesh(...) Part2DGeomFrom2DMesh(...) PartFromExtrude2DMesh(...) PartFromSection3DMeshByPlane(...) 以下的两个py文件为abaqus 6.6版本支持的py文件 参考py文件（从odb文件中导出）： Reads the output database file and imports the deformed shape of the billet at the end of step 1 as an orphan mesh part. The orphan mesh part is then used to create a 2D solid part which can be meshed by the user. from abaqus import * from abaqusConstants import * import part # NOTE: USER MUST DEFINE THESE VARIABLES. odbName = Job-2.odb # Name of output database file. modelName = Model-1 # Model name. orphanInstance = PART-1-1 # Deformed instance name. deformedShape = DEFORMED # Shape. angle = 15.0 # Feature angle. importStep = 2 # Step number. # Import orphan mesh part. orphanBillet = mdb.models[Model-1].PartFromOdb(fileName=odbName, name=orphanBillet, instance=orphanInstance, shape=deformedShape, step=importStep) # Extract 2D profile and create a solid part. newBillet = mdb.models[Model-1].Part2DGeomFrom2DMesh(name=newBillet, part=orphanBillet, featureAngle=angle) newBillet1 = mdb.models[Model-1].PartFromExtrude2DMesh(name=newBillet1, depth=20, part=orphanBillet, elementSize=5) print Deformed billet is now ready for rezoning. 参考py文件（从inp文件中导出） Reads the output database file and imports the deformed shape of the billet at the end of step 1 as an orphan mesh part. The orphan mesh part is then used to create a 2D solid part which can be meshed by the user. from abaqus import * from abaqusConstants import