丙烯酸-马来酸酐共聚物的合成研究.pdfVIP

  • 67
  • 0
  • 约1.17万字
  • 约 4页
  • 2017-05-11 发布于河南
  • 举报
丙烯酸-马来酸酐共聚物的合成研究

第40卷第 l期 应 用 化 工 Vo1.40No.1 2011年 1月 AppliedChemicalIndustry Jan.2011 丙烯酸一马来酸酐共聚物的合成研究 敖明,薛永强,崔子祥 (太原理工大学 应用化学系 山西 太原 030024) 摘 要:以丙烯酸、马来酸酐为原料,亚硫酸氢钠为链转移剂,过硫酸钾为引发剂研究了丙烯酸-马来酸酐共聚物的 合成,考察了聚合温度、链转移剂和引发剂配比对丙烯酸一马来酸酐共聚物的相对分子量的影响,并考察了其相对 分子量与其分散性能之间的关系。结果表明,聚合温度控制在6O一70℃之间,NaHSO,与 s2O。质量之比控制在 1.5—2,丙烯酸.马来酸酐共聚物的相对分子量分布在2000—4000;相对分子量在 2000左右的丙烯酸 ·马来酸酐 共聚物有最佳的分散性能。 关键词 :丙烯酸;马来酸酐;相对分子量 ;分散性能 中图分类号:O632.5 文献标识码 :A 文章编号:1671—3206(2011)01—0078一o4 Studyonsynthesisofacrylic-maleicanhydridecopolymer AO ,XUE 一qiang,CUIZi—xiang (DepartmentofAppliedChemistry,TaiyuanUniversityofTechnology,Taiyuan030024,China) Abstract:Maleicanhydride—acrylicacidcopolymerwassynthesized withmaleicanhydrideandacrylic acidasmaterials,kalium persulfateasinitiatorandsodium bisulfiteaschaintransferagent.Theinfluence ofhtepolymerization temperature,hteratioofkalium persulfateto sodium bisulfiteonhtemolecular weightofhtecopolymerwasstudied,andtherelationbetweenhtemolecularweightandhteperformanceof dispersalwasdiscussed.Theresultsshow thatwhenthereactiontemperatureisbetween60 ℃ and70℃ andtheratioofkalium persulfatetosodium bisulfiteisbetween1.5and2,themoleculra weightoftheco— polymerfrom 2000to4000;maleicanhydride—acrylicacidcopolymerwhosemolecularweightisabout 2000hasthebestdispersibility. Keywords:acrylicacid;maleicanhydride;molecularweight;performanceofdispersal 丙烯酸-马来酸酐共聚物是一种低分子量的聚 聚合反应条件对其相对分子量的影响,对于优化生 电解质,由于其具有很强的分散作用和高热稳定性, 产工艺,提高分散性能是非常必要的。 且与其它水处理药剂具有 良好的相容性和协同增效 本文重点考察 了聚合温度 、链转移剂和引发剂 作用,因此被应用作高分子代磷助剂、纺织印染助剂 配比对丙烯酸一马来酸酐共聚物的相对分子量的影 和除垢剂等¨。J。目前关于丙烯酸。马来酸酐共聚物 响,并研究了其相对分子量与其分散性能之间的关 制备的文献报道

文档评论(0)

1亿VIP精品文档

相关文档