Al_2O_3陶瓷超声磨削的微观机理分析.pdfVIP

!2006 3 设计∀研究 Al O 2 3 李富龙, 徐家文 ( , 210016 ) : 对Al2O3 陶瓷的超声磨削在微观机理上进行了初步探究, 并根据实 数据分析了不同 加工条件对加工表面质量的影响, 对超声和机械磨削加工效果也进行了对比实 表明超声应用 于加工Al O 陶瓷有助于改善表面加工质量, 因此, 也可用于加工类似的高硬脆材料 2 3 : Al2O3 ; ; : TG580. 1+ 1 Microcosmic Mechanism Analysis of Ultrasonic Grinding Machining Al O Ceramics 2 3 Li Fulong, Xu Jiawen ( anjing University of Aeronautics and Astronautics, anjing 210016,China ) Abstract: Themechanism of ultrasonic grinding Al O ceramics is preliminary researched in mi 2 3 crocosm, the analyses of some kinds of machining conditions effected on the surface quality machined is given, the effects of ultrasonicgrinding and mechanicalgrinding is also compared based on experimen tal data. Experiment reveal that ultrasonicbeing used in machining Al2O3 ceramicwill improve quality of the machined surface, can be used in machining similar materials of high rigidity and brittleness. Key words: Al2O3 ceramics;microcosmic mechanism;ultrasonic grinding , : ; c ; , = 2 f ; A f , , , 2 100 W/ cm , : S ( t ) = A sin ,, ( 2 f t) S ( t ) ; A ; f , ; t : v ( t ) = d( S ( t) ) / dt = 2 f A cos( 2 f t) , A ( t ) = d( v ( t) ) / dt = - 2 2