中台湾游行联盟校园组组内会议纪录表-CY2823-12L8L.PDFVIP

CY2823-12L/8L V0.9 A Car Charger Chip with DC/DC and Type-C+ QC 2.0 Capability FEATURES • 4.5V to 36V Input Voltage Range • USB Type-C v1.1 Cable Detect • 3A Continuous Output Current • Built-in discharge path for QC Type-C • 100m ohm Internal Power MOSFET Switch • Support QC 2.0 Class A: 5V, 9V, and 12V • Fixed 420kHz Switching Frequency • Support BC1.2 DCP mode • Cycle-by-Cycle Current Limit • Support Legacy Devices Fast Charging • Over-Current/ Temperature Protection • Automatic Selection for different mode • Thermally Enhanced Packages APPLICATIONS PACKAGES • Car Chargers • SOP-8EP • Cigarette Lighter Adaptor (CLA) • QFN-12L • Power bank Charging port GENERAL DESCRIPTION CY2823 is an USB Car Charger which integrates a DC/DC converter and a Type-C+ QC 2.0 charger decoder together. For the DC/DC converter, it covers a wide input voltage and provides high efficiency current mode control during the step – down process for fast loop response and easy compensation. For the charger ID capability, this device has different charger types including emerging Type-C, QC 2.0 Class A, BC 1.2, DCP modes, and legacy devices. The DC/DC converter of CY2823 provides a 3A, current-mode step-down converter with an integrated high-side switch. It operates with a wide input voltage from 4.5V to 36V, and the PWM switching frequency fixed at 420kHz internally. Meanwhile, it performs a highly efficient control for fast loop response and easy compensation by automatically entering into PSM mode during li