盐酸米托葸醌多囊脂质体的制备工艺优化及性能.pdfVIP

  • 22
  • 0
  • 约2.05万字
  • 约 6页
  • 2017-05-11 发布于河南
  • 举报

盐酸米托葸醌多囊脂质体的制备工艺优化及性能.pdf

盐酸米托葸醌多囊脂质体的制备工艺优化及性能

学兔兔 化 工 进 展 2013年第32卷第6期 CHEMICAL INDUSTRY AND ENGINEERING PROGRESS ·1395· 盐酸米托葸醌多囊脂质体的制备工艺优化及性能 刘源岗 ,郑琪瑶 ,王士斌 ( 华侨大学化工学院,福建 厦门 361021; 华侨大学制药工程研究所,福建 厦门 361021) 摘 要:采用均匀设计优化并制备了平均粒径为58.75 gm的载盐酸米托蒽醌多囊脂质体。该多囊脂质体粒度分 布较窄,球形度好。Zeta电位、相变温度及稳定性考察均表明该体系稳定性强,适于药物的释放体系 渗漏率 结果表明相对于室温(37℃),冰箱(4℃)更有利于载药多囊脂质体的保存。盐酸米托蒽醌平均包封率为90.13%, 考察了胆固醇及三油酸甘油酯用量对多囊脂质体药物释放的影响,药物释放符合 药典》规定,无突释效应, 且具有较好的体外缓释性能。 关键词:盐酸米托蒽醌;多囊脂质体;均匀设计;稳定性;缓释 中图分类号:R 318 文献标志码:A 文章编号:1000—6613(2013)06—1395一O6 DoI:10.3969~.issn.1000-6613.2013.06.033 Preparation optimization and characterization of DHAD loaded multivesicular liposomes LIUYuangang 2 , ZHENG Qiyao ,WANG Shibin (1College ofChemicalEngineering,HuaqiaoUniversity,Xiamen 361021,Fujian,China: InstitutesofPharmaceutical Engineering,Huaqiao University,Xiamen 361021,Fujian,China) Abstract:DHAD loaded multivesicular liposomes(DHAD—MVLs)with the mean diameter of 58.75 gm were prepared using uniform design.The DHAD-MVLs showed narrow particle size distribution and good sphericity.Zeta potential,DSC and drug stability test all revealed that this system was stable and fit for drug delivery system.Leakage rate results indicated that 4℃ was better for drug—loaded MVLs storage compared to 37℃.The average encapsulation efficiency Of DHAD was 90.1 3%. Finally,the influences of cholesterol and trioleate contents on cumulative release were investigated.AIl groups were in accord with the C’hina Pharmacopoeia 20 1 0,which meant that there were no burst release and the DHAD

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档