思科Nexus7000产品手册.ppt

* General Notes: VRRP doesn’t support MD5 authentication The VRRP Advertisement Interval can be configured from 1 – 255 seconds * Additional CLI Snapshot: n7000-1# show vrrp vr 1 interface ethernet 2/1 statistics IPv4 vr id 1 statistics Become master 1 Advertisement 0 Advertisement Interval Error 0 Authentication Failure 0 TTL Error 0 Priority 0 Received 0 Priority 0 Sent 0 Invalid Type 0 Mismatch Address List 0 Invalid Authentication Type 0 Mismatch Authentication 0 Invalid Packet Lenght 0 * General Notes: Additional Clients such as EEM and vPC can leverage Object Tracking You can track Ethernet, Loopback, Port-Channel, Sub-Interfaces, Tunnel and VLAN Interfaces Object Tracking can be performed in any VDC or VRF Multiple objects can be tracked per GLBP, HSRP, or VRRP group Object track lists can be configured with weight thresholds 500 tracked objects are supported per VDC * General Notes: * * * * * * * General Notes: You typically do not want to disable IGMP snooping unless there is an issue that impacts the network in a negative manner. * * * General Notes: The syntax changed for enabling and disabling TELNET and SSHv2 in 4.1 software – The “feature telnet” or “feature ssh” are the new commands * General Notes: You cannot change Default Roles and you cannot delete the Default “admin” User Role names can only be 16 Characters You can create up to 64 User Defined Roles in a VDC A user can be assigned to a maximum of 64 roles You can add up to 256 rules per User Role You can configure up to 256 User Accounts A user account must have at least one role User Accounts passwords are automatically synced to SNMPv3 Account Passwords If a user belongs to multiple roles he can perform a union of all roles/rules * * * General Notes: Rules are executed in descending order – Therefore, the following role would deny access to all “show” command with the exception of any “show interface *” command role name test rule 2 permit command show interface * rule 1 deny com