基于plc的自动送料装车控制系统的设计(修改)_大学论文.docVIP

基于PLC的自动送料小车控制设计 学生： 指导教师： 摘要：可编程序控制器（Programmable controller）简称PLC，由于PLC的，PLC控制小车；第三章介绍了送料小车的应达到的控制要求；第四章到第七章根据控制要求进行了小车系统的具体设计，包括端子接线图、梯形图(分段设计说明和系统总梯形图)和程序指令设计；最后得出结论。 关键词：PLC，送料小车，控制，程序设计 THE DESIGN OF CONTROLLING IN THE AUTOMATIC FEEDING CAR BASED ON PLC Abstract:Programmable logic controller referred to PLC ，because of the high reliability PLC adaptability，flexibility，environment，use convenient，simple maintenance，so the application of PLC in the rapidly expanding. In early PLC ，always have relays place，can use. But in todays PLC to control system that almost say there is need of place of PLC. Especially in recent years， the cost of PLC ， function and not increase， so，at the moment，PLC at home and abroad，has been widely used in various industries. In order to achieve the design of the car feed the transformation of manual and automated，simple to change the past，car manual feed，a reduction of the workforce， increased productivity，automated production! Feeding and the car is designed to be as a result of bad working conditions are not allowed to enter the working environment of the circumstances formed. This article from the first chapter to second chapter of the feed system of the car identified as an entry point to introduce a car Why choose PLC control; Chapter III introduced the car feed the control requirements to be met; Chapter Ⅳ to chapter Ⅶ under the control of the car system to carry out the specific design，including the terminal wiring diagram，ladder diagram (Sub-total system design descriptions and ladder) and procedures for instruction design; the final conclusion.Keywords:PLC ，Feeding car，Control，Program design 目 录 前言 1 1 自动送料装车系统简介 1 1.1 自动送料装车系统的特点 1 1.2 自动送料装车系统的应用 1 1.3 自动送料装车系统与其他机械系统共同的特征 1 1.4 基于PLC自动送料装置简介 2 2 PLC简介 2 2.1 PLC简介 2 2.1.1 PLC的特点 2 2.1.2 PLC控制思路 2 2.2 PLC的功能 3 2.3 PLC的电源 4 3 自动送料装车系统总体设计方案 4 3.1 概述 4 3.2 控制要求 5 3.3 系统组成 6 3.4 工作原理 7 4 PLC控制系统的设计 7 4.1 了解PLC控制系统设计的步骤 7 4.2 设计中PLC控制系统语言 8 4